找回密码
 新注册用户
搜索
楼主: Lynt

[分享] Ubuntu Linux安装Teamviewer,N卡驱动/超频,FAH(2015/3/9更新)

[复制链接]
发表于 2015-3-5 16:30:08 | 显示全部楼层
问下

双卡 第二张卡没有超频选项

什么情况?
回复

使用道具 举报

发表于 2015-3-5 17:00:14 | 显示全部楼层
@金鹏 没有在linux下   测试过  只有一张卡可以超频  另外一张卡没有超频选项

现在在win10平台
回复

使用道具 举报

 楼主| 发表于 2015-3-5 18:29:44 | 显示全部楼层
543019556 发表于 2015-3-5 16:30
问下

双卡 第二张卡没有超频选项

因为没有双卡环境,无法实测,只能提供思路:

教程中运行
  1. sudo nvidia-xconfig --cool-bits=28
复制代码
增加超频选项,最后被写入/etc/X11/xorg.conf文件中的 Section "Screen"这个段中,而文件中只有一个Screen段,对应的Device就是有超频选项的卡,建议尝试为另一张卡创建Screen(类似Windows下扩展屏幕的作法),然后参照原Screen段为新的Screen段添加 Coolbits 参数,修改配置文件前记得备份,以便出问题后还原。
回复

使用道具 举报

 楼主| 发表于 2015-3-6 17:43:17 | 显示全部楼层
本帖最后由 Lynt 于 2015-3-6 17:45 编辑
543019556 发表于 2015-3-5 17:00
@金鹏 没有在linux下   测试过  只有一张卡可以超频  另外一张卡没有超频选项

现在在win10平台  ...

今天研究了一下N家驱动官方说明,发现一些可以尝试的,其中关于coolbits的说明,看了这个也明白为何要设成28了(16+8+4,打开对应的三个功能):
  1. Option "Coolbits" "integer"
  2. Enables various unsupported features, such as support for GPU clock manipulation in the NV-CONTROL X extension. This option accepts a bit mask of features to enable.

  3. WARNING: this may cause system damage and void warranties. This utility can run your computer system out of the manufacturer's design specifications, including, but not limited to: higher system voltages, above normal temperatures, excessive frequencies, and changes to BIOS that may corrupt the BIOS. Your computer's operating system may hang and result in data loss or corrupted images. Depending on the manufacturer of your computer system, the computer system, hardware and software warranties may be voided, and you may not receive any further manufacturer support. NVIDIA does not provide customer service support for the Coolbits option. It is for these reasons that absolutely no warranty or guarantee is either express or implied. Before enabling and using, you should determine the suitability of the utility for your intended use, and you shall assume all responsibility in connection therewith.

  4. When "2" (Bit 1) is set in the "Coolbits" option value, the NVIDIA driver will attempt to initialize SLI when using GPUs with different amounts of video memory.

  5. When "4" (Bit 2) is set in the "Coolbits" option value, the nvidia-settings Thermal Monitor page will allow configuration of GPU fan speed, on graphics boards with programmable fan capability.

  6. When "8" (Bit 3) is set in the "Coolbits" option value, the PowerMizer page in the nvidia-settings control panel will display a table that allows setting per-clock domain and per-performance level offsets to apply to clock values. This is allowed on certain GeForce GPUs. Not all clock domains or performance levels may be modified.

  7. When "16" (Bit 4) is set in the "Coolbits" option value, the nvidia-settings command line interface allows setting GPU overvoltage. This is allowed on certain GeForce GPUs.

  8. When this option is set for an X screen, it will be applied to all X screens running on the same GPU.

  9. The default for this option is 0 (unsupported features are disabled).
复制代码
http://us.download.nvidia.com/XFree86/Linux-x86_64/346.47/README/xconfigoptions.html

最后提到 When this option is set for an X screen, it will be applied to all X screens running on the same GPU.  这个还是对X screen设置然后套用到对应GPU的。


另外用
  1. nvidia-xconfig -A
复制代码
查看这个nvidia-xconfig指令的详细说明,发现一个参数(-a或--enable-all-gpus):
  1. -a, --enable-all-gpus
  2.       Configure an X screen on every GPU in the system.
复制代码
貌似可以为系统中每个GPU(应该指N卡GPU)创建一个 X screen,我理解为这个 X screen中包含系统中所有GPU或者是为每个GPU创建一个 X screen,不知道哪个对,可以尝试一下,看看结果,用这条指令(执行前请备份旧的配置文件/etc/X11/xorg.conf):
  1. sudo nvidia-xconfig -a
复制代码

评分

参与人数 1基本分 +8 收起 理由
金鹏 + 8 赞一个!

查看全部评分

回复

使用道具 举报

 楼主| 发表于 2015-3-9 18:47:25 | 显示全部楼层
2015/3/9 更新,增加多张Nvidia显卡开启超频选项的方法,感谢论坛543019556兄弟测试验证!

评分

参与人数 1基本分 +8 收起 理由
金鹏 + 8 辛苦了!

查看全部评分

回复

使用道具 举报

发表于 2015-3-10 13:52:50 | 显示全部楼层
本帖最后由 animatrix 于 2015-3-10 18:15 编辑

找了好久的Nvidia超頻,最後終於在這邊找到了。感謝樓主啊~
剛剛小試了一下,果然加壓跟超頻都可以作用

不曉得GTX 960大家加壓跟頻率大多是落在多少呢?
回复

使用道具 举报

发表于 2015-3-18 08:12:45 | 显示全部楼层
好帖我頂
回复

使用道具 举报

发表于 2015-4-5 21:42:20 来自手机 | 显示全部楼层
问一句,linux下下载速度很慢是啥原因呢,感觉普遍比win下慢
回复

使用道具 举报

 楼主| 发表于 2015-4-5 22:08:32 | 显示全部楼层
luojun3138 发表于 2015-4-5 21:42
问一句,linux下下载速度很慢是啥原因呢,感觉普遍比win下慢

这个感觉不明显,是下FAH包慢还是下载其他东西慢?
回复

使用道具 举报

发表于 2015-4-7 21:47:56 | 显示全部楼层
Lynt 发表于 2015-4-5 22:08
这个感觉不明显,是下FAH包慢还是下载其他东西慢?

比如用命令行下驱动什么的感觉很慢
回复

使用道具 举报

 楼主| 发表于 2015-4-8 08:48:15 | 显示全部楼层
luojun3138 发表于 2015-4-7 21:47
比如用命令行下驱动什么的感觉很慢

这主要是因为wget是单线程下载吧,跟你用迅雷之类的工具不能比,但是wget还是很强大的:

http://forum.ubuntu.org.cn/viewtopic.php?t=213029
回复

使用道具 举报

发表于 2015-4-8 10:08:47 | 显示全部楼层
Lynt 发表于 2015-4-8 08:48
这主要是因为wget是单线程下载吧,跟你用迅雷之类的工具不能比,但是wget还是很强大的:

http://forum.u ...

wget也能很快,关键在网速
回复

使用道具 举报

 楼主| 发表于 2015-4-8 11:00:56 | 显示全部楼层
wpf999 发表于 2015-4-8 10:08
wget也能很快,关键在网速

是的,碰到有些东西要从国外网站下载时候受出口限制,单线程就跑不快了
回复

使用道具 举报

发表于 2015-4-8 23:51:15 来自手机 | 显示全部楼层
Lynt 发表于 2015-4-8 11:00
是的,碰到有些东西要从国外网站下载时候受出口限制,单线程就跑不快了
...

用电信都不行,难道必须vpn吗
回复

使用道具 举报

 楼主| 发表于 2015-4-9 08:53:46 | 显示全部楼层
luojun3138 发表于 2015-4-8 23:51
用电信都不行,难道必须vpn吗

这不确定,通常windows单线程不慢的话,linux下也不会慢,之前把linux装在USB2.0 的U盘上,什么操作都会很慢,其他原因还没有碰到过。你可以试一下局域网传文件到linux下看看慢不慢,以排除linux下网卡(驱动)问题的可能。如果你通过路由器共享上网,也可能是路由器上某些设置(如MTU值)造成的问题,这个可能性较小,除非你专门做过这方面的设置。
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2024-3-29 20:07

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表