找回密码
 新注册用户
搜索
查看: 4565|回复: 5

[分享] 感谢O版捐赠的贼船60G SSD-重灌了系统

[复制链接]
发表于 2014-1-18 14:17:39 | 显示全部楼层 |阅读模式
本帖最后由 金鹏 于 2014-1-19 11:04 编辑

前几天就收到了,连顺丰运费O版都给付了,再次一并表示感谢!

2.jpg


1.jpg



前几天工作较忙,今天才抽空装到2P机器上,灌了[H] Ubuntu Folding Appliance -- alternative approach to Linux folding
鸡血系统

有疑问请教各位高手:
1/ 这个鸡血系统下不能使用WEB控制页面? 控制不方便咋整?
2/找不到langouste的LOG文件,也不知开没开langouste程序?


===============================
存盘时间只用了16秒比起以前15分钟+天地之别langouste代理同时下载只用了不到4分钟,比起以前20分钟+堪称神速
可惜找不到langouste.log文件,看不出代理上传用时和速度,求科普?
(鸡血系统下查找langouste.log有2个不同目录下,但是看日期都不符合)
  1. [13:55:09] Completed 250000 out of 250000 steps  (100%)
  2. [13:55:20] DynamicWrapper: Finished Work Unit: sleep=10000
  3. [13:55:30]
  4. [13:55:30] Finished Work Unit:
  5. [13:55:30] - Reading up to 64206000 from "work/wudata_09.trr": Read 64206000
  6. [13:55:30] trr file hash check passed.
  7. [13:55:30] - Reading up to 31547548 from "work/wudata_09.xtc": Read 31547548
  8. [13:55:30] xtc file hash check passed.
  9. [13:55:30] edr file hash check passed.
  10. [13:55:30] logfile size: 191568
  11. [13:55:30] Leaving Run
  12. [13:55:32] - Writing 96105992 bytes of core data to disk...
  13. [13:55:48] Done: 96105480 -> 91368428 (compressed to 5.6 percent)
  14. [13:55:48]   ... Done.
  15. [13:55:48] - Shutting down core
  16. [13:55:48]
  17. [13:55:48] Folding@home Core Shutdown: FINISHED_UNIT
  18. [13:55:48] CoreStatus = 64 (100)
  19. [13:55:48] Unit 9 finished with 72 percent of time to deadline remaining.
  20. [13:55:48] Updated performance fraction: 0.446738
  21. [13:55:48] Sending work to server
  22. [13:55:48] Project: 8104 (Run 0, Clone 4, Gen 344)


  23. [13:55:48] + Attempting to send results [January 18 13:55:48 UTC]
  24. [13:55:48] - Reading file work/wuresults_09.dat from core
  25. [13:55:48]   (Read 91368940 bytes from disk)
  26. [13:55:48] Connecting to http://128.143.231.201:8080/
  27. [13:55:48] - Couldn't send HTTP request to server
  28. [13:55:48] + Could not connect to Work Server (results)
  29. [13:55:48]     (128.143.231.201:8080)
  30. [13:55:48] + Retrying using alternative port
  31. [13:55:48] Connecting to http://128.143.231.201:80/
  32. [13:55:48] - Couldn't send HTTP request to server
  33. [13:55:48] + Could not connect to Work Server (results)
  34. [13:55:48]     (128.143.231.201:80)
  35. [13:55:48] - Error: Could not transmit unit 09 (completed January 18) to work server.
  36. [13:55:48] - 1 failed uploads of this unit.
  37. [13:55:48]   Keeping unit 09 in queue.
  38. [13:55:48] Trying to send all finished work units
  39. [13:55:48] Project: 8104 (Run 0, Clone 4, Gen 344)


  40. [13:55:48] + Attempting to send results [January 18 13:55:48 UTC]
  41. [13:55:48] - Reading file work/wuresults_09.dat from core
  42. [13:55:48]   (Read 91368940 bytes from disk)
  43. [13:55:48] Connecting to http://128.143.231.201:8080/
  44. [13:55:48] - Couldn't send HTTP request to server
  45. [13:55:48] + Could not connect to Work Server (results)
  46. [13:55:48]     (128.143.231.201:8080)
  47. [13:55:48] + Retrying using alternative port
  48. [13:55:48] Connecting to http://128.143.231.201:80/
  49. [13:55:48] - Couldn't send HTTP request to server
  50. [13:55:48] + Could not connect to Work Server (results)
  51. [13:55:48]     (128.143.231.201:80)
  52. [13:55:48] - Error: Could not transmit unit 09 (completed January 18) to work server.
  53. [13:55:48] - 2 failed uploads of this unit.


  54. [13:55:48] + Attempting to send results [January 18 13:55:48 UTC]
  55. [13:55:48] - Reading file work/wuresults_09.dat from core
  56. [13:55:48]   (Read 91368940 bytes from disk)
  57. [13:55:48] Connecting to http://128.143.199.97:8080/
  58. [13:55:48] - Couldn't send HTTP request to server
  59. [13:55:48] + Could not connect to Work Server (results)
  60. [13:55:48]     (128.143.199.97:8080)
  61. [13:55:48] + Retrying using alternative port
  62. [13:55:48] Connecting to http://128.143.199.97:80/
  63. [13:55:48] - Couldn't send HTTP request to server
  64. [13:55:48] + Could not connect to Work Server (results)
  65. [13:55:48]     (128.143.199.97:80)
  66. [13:55:48]   Could not transmit unit 09 to Collection server; keeping in queue.
  67. [13:55:48] + Sent 0 of 1 completed units to the server
  68. [13:55:48] - Preparing to get new work unit...
  69. [13:55:48] Cleaning up work directory
  70. [13:55:48] + Attempting to get work packet
  71. [13:55:48] Passkey found
  72. [13:55:48] - Will indicate memory of 32127 MB
  73. [13:55:48] - Connecting to assignment server
  74. [13:55:48] Connecting to http://assign.stanford.edu:8080/
  75. [13:55:48] - Couldn't send HTTP request to server
  76. [13:55:48] + Could not connect to Assignment Server
  77. [13:55:48] Connecting to http://assign2.stanford.edu:80/
  78. [13:55:48] - Couldn't send HTTP request to server
  79. [13:55:48] + Could not connect to Assignment Server 2
  80. [13:55:48] + Couldn't get work instructions.
  81. [13:55:48] - Attempt #1  to get work failed, and no other work to do.
  82. Waiting before retry.
  83. [13:56:06] + Attempting to get work packet
  84. [13:56:06] Passkey found
  85. [13:56:06] - Will indicate memory of 32127 MB
  86. [13:56:06] - Connecting to assignment server
  87. [13:56:06] Connecting to http://assign.stanford.edu:8080/
  88. [13:56:17] Posted data.
  89. [13:56:17] Initial: 8F80; - Successful: assigned to (128.143.231.201).
  90. [13:56:17] + News From Folding@Home: Welcome to Folding@Home
  91. [13:56:17] Loaded queue successfully.
  92. [13:56:17] Sent data
  93. [13:56:17] Connecting to http://128.143.231.201:8080/
  94. [13:56:23] Posted data.
  95. [13:56:23] Initial: 0000; - Receiving payload (expected size: 30310364)
  96. [13:58:58] - Downloaded at ~190 kB/s
  97. [13:58:58] - Averaged speed for that direction ~343755 kB/s
  98. [13:58:58] + Received work.
  99. [13:58:58] Trying to send all finished work units
  100. [13:58:58] Project: 8104 (Run 0, Clone 4, Gen 344)


  101. [13:58:58] + Attempting to send results [January 18 13:58:58 UTC]
  102. [13:58:58] - Reading file work/wuresults_09.dat from core
  103. [13:58:58]   (Read 91368940 bytes from disk)
  104. [13:58:58] Connecting to http://128.143.231.201:8080/
  105. [13:58:58] - Couldn't send HTTP request to server
  106. [13:58:58] + Could not connect to Work Server (results)
  107. [13:58:58]     (128.143.231.201:8080)
  108. [13:58:58] + Retrying using alternative port
  109. [13:58:58] Connecting to http://128.143.231.201:80/
  110. [13:58:58] - Couldn't send HTTP request to server
  111. [13:58:58] + Could not connect to Work Server (results)
  112. [13:58:58]     (128.143.231.201:80)
  113. [13:58:58] - Error: Could not transmit unit 09 (completed January 18) to work server.
  114. [13:58:58] - 3 failed uploads of this unit.


  115. [13:58:58] + Attempting to send results [January 18 13:58:58 UTC]
  116. [13:58:58] - Reading file work/wuresults_09.dat from core
  117. [13:58:58]   (Read 91368940 bytes from disk)
  118. [13:58:58] Connecting to http://128.143.199.97:8080/
  119. [13:58:58] - Couldn't send HTTP request to server
  120. [13:58:58] + Could not connect to Work Server (results)
  121. [13:58:58]     (128.143.199.97:8080)
  122. [13:58:58] + Retrying using alternative port
  123. [13:58:58] Connecting to http://128.143.199.97:80/
  124. [13:58:58] - Couldn't send HTTP request to server
  125. [13:58:58] + Could not connect to Work Server (results)
  126. [13:58:58]     (128.143.199.97:80)
  127. [13:58:58]   Could not transmit unit 09 to Collection server; keeping in queue.
  128. [13:58:58] + Sent 0 of 1 completed units to the server
  129. [13:58:58] + Closed connections
  130. [13:58:58]
  131. [13:58:58] + Processing work unit
  132. [13:58:58] Core required: FahCore_a5.exe
  133. [13:58:58] Core found.
  134. [13:58:58] Working on queue slot 00 [January 18 13:58:58 UTC]
  135. [13:58:58] + Working ...
  136. [13:58:58] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 00 -np 32 -checkpoint 15 -verbose -lifeline 5563 -version 634'

  137. [13:58:58]
  138. [13:58:58] *------------------------------*
  139. [13:58:58] Folding@Home Gromacs SMP Core
  140. [13:58:58] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
  141. [13:58:58]
  142. [13:58:58] Preparing to commence simulation
  143. [13:58:58] - Looking at optimizations...
  144. [13:58:58] - Created dyn
  145. [13:58:58] - Files status OK
  146. [13:59:01] - Expanded 30309852 -> 33158020 (decompressed 109.3 percent)
  147. [13:59:01] Called DecompressByteArray: compressed_data_size=30309852 data_size=33158020, decompressed_data_size=33158020 diff=0
  148. [13:59:01] - Digital signature verified
  149. [13:59:01]
  150. [13:59:01] Project: 8101 (Run 11, Clone 0, Gen 433)
  151. [13:59:01]
  152. [13:59:01] Assembly optimizations on if available.
  153. [13:59:01] Entering M.D.
  154. [13:59:07] Mapping NT from 32 to 32
  155. [13:59:11] Completed 0 out of 250000 steps  (0%)
  156. [14:15:41] Completed 2500 out of 250000 steps  (1%)
  157. [14:31:45] Completed 5000 out of 250000 steps  (2%)
复制代码
回复

使用道具 举报

发表于 2014-1-18 15:29:18 | 显示全部楼层
2/找不到langouste的LOG文件,也不知开没开langouste程序?

你用top看看?
回复

使用道具 举报

 楼主| 发表于 2014-1-19 11:31:07 | 显示全部楼层

TOP查看不到langouste进程,但是确认代理有效了
就是不知哪里langouste.log文件,想看看到底上传速率多少
FAH共享目录里木有
回复

使用道具 举报

发表于 2014-1-19 11:52:59 | 显示全部楼层
估计不是一套程序或者类似的程序吧
回复

使用道具 举报

 楼主| 发表于 2014-1-19 12:06:59 | 显示全部楼层
opshang 发表于 2014-1-19 11:52
估计不是一套程序或者类似的程序吧

嗯,有可能是整机代理,以前的其他系统是BIGADV客户端代理

兄弟的2P E5跑的不是鸡血系统?
回复

使用道具 举报

发表于 2014-1-19 14:41:34 | 显示全部楼层
金鹏 发表于 2014-1-19 12:06
嗯,有可能是整机代理,以前的其他系统是BIGADV客户端代理

兄弟的2P E5跑的不是鸡血系统?

不是,就是普通的Linux
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~
欢迎大家多多支持基金会~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2024-5-4 23:22

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表