找回密码
 新注册用户
搜索
楼主: 金鹏

[分享] 用VirtualBox在WIN下高效运行Linux 64的V6/SMP2&BIGADV简易教程V1.50

  [复制链接]
发表于 2011-11-26 21:59:04 | 显示全部楼层
回复 70# 金鹏

我在 E3-1230 上试过,win7-32bit 下大概 4 分钟 1%,选用 i7-avx 能提高 20 秒,如果是 i7(就是默认选项),能提高到将近 30 秒。
回复

使用道具 举报

发表于 2011-11-26 22:05:39 | 显示全部楼层
回复 68# eai

i3 只能跑 SMP2,bigadv 需要 8 核以上才行。但 SMP2 也推荐用虚拟机,能提高不少。
回复

使用道具 举报

 楼主| 发表于 2011-11-26 22:55:14 | 显示全部楼层
回复 76# refla


    SMP2下是默认I7速度略快些,但是在BIGADV下选错CPU类型PPD会有很大的下降。

感觉LINUX下针对BIGADV优化程度要比SMP2高
回复

使用道具 举报

发表于 2011-11-27 08:46:30 | 显示全部楼层
回复 78# 金鹏

能不能从包的编号看出是 smp2 还是 bigadv?

我发现在 win 版本下,两者是通用的。我第一次(在win)跑 bigadv 时,发现它是接着跑 smp2 的包
回复

使用道具 举报

 楼主| 发表于 2011-11-27 09:47:29 | 显示全部楼层
回复 79# refla

一般2684 2685 2686 2692 6900 6901 6903 6904 都是BA包,其他的就可以认为是SMP包了.

两者客户端是通用
回复

使用道具 举报

发表于 2011-12-9 22:59:31 | 显示全部楼层
解决异常退出虚拟机后,带来怪异问题的通用方法。

问题描述见http://www.equn.com/forum/redire ... 2653&pid=433937

解决方法:
先删除掉原来的 Linux64_FAH 镜像文件(直接拷贝过去不行),然后把原始的 Linux64_FAH 文件拷贝过去。当然,启动虚拟机后,需要重新设置 FAH。

评分

参与人数 1基本分 +10 收起 理由
金鹏 + 10 精品文章

查看全部评分

回复

使用道具 举报

 楼主| 发表于 2011-12-20 15:32:53 | 显示全部楼层

VirtualBox 4.1.8 (released 2011-12-19)

This is a maintenance release. The following items were fixed and/or added:

VMM: fixed VERR_MAP_FAILED during savestate under certain circumstances (bug #7929)
GUI: stop updating the VM status icons when the VM is paused (bug #8368)
VBoxManage: fixed wrong return code after startvm (bug #9642)
BIOS: fixed hang at launch of DOS applications generated by Clipper 5.3 (note that hardware virtualization may be required)
USB: fixed OS/2 boot hang when using recent USB drivers
NAT: increase maximum number of parallel connections making connections with port forwarding more robust (#8471)
Metrics: fixed potential problem with invalid access in guest metrics collection upon VM destruction
Main: don't crash if a medium is ejected twice (bug #9922)
VBoxSVC: fixed crash under rare circumstances (e.g. client crash)
VRDP: fixed screen freeze (bug #9620)
OVF/OVA: fixed broken disk images on import under rare circumstances
OVF/OVA: better error message when importing corrupted appliances
VMDK/VHD: fixed a possible corruption with host cache disabled when using snapshots under rare circumstances (bug #9749)
3D Support: Fixed fullscreen mode issues for ATI graphics (bug #9775), Windows Media Player rendering for XPDM-based Direct3D support (bug #8341). Multiple fixes to XPDM and WDDM - based 3D support for Windows Guests and for 3D support in general
Linux hosts: fixes for Fedoras Linux 2.6.41 (bug #9948)
Linux hosts/guests: fixes for Linux 3.2 (bug #9743)
Solaris Additions: various shared folder fixes (bugs #9856, #9862, #9917)
Windows Additions: various fixes for Direct3D support (un)installation, added detection of missing or wrong Direct3D system files
回复

使用道具 举报

发表于 2011-12-21 23:23:55 | 显示全部楼层
专门买了颗6C12T跑了大概两个月BA我已经很满足了

1月16日转SMP2后ppd降低一半妥妥的

评分

参与人数 1基本分 +8 收起 理由
金鹏 + 8 BA给力

查看全部评分

回复

使用道具 举报

发表于 2012-2-24 20:14:03 | 显示全部楼层
32位win xp可以用此法跑吗
回复

使用道具 举报

 楼主| 发表于 2012-2-25 11:23:18 | 显示全部楼层
回复 84# wpf999

可以的,32位宿主系统下设置时别忘记把 启用PAE/NX扩展勾上


捕获.PNG
回复

使用道具 举报

发表于 2012-2-25 13:20:33 | 显示全部楼层
回复 85# 金鹏


    谢谢金版,过几天有空了我试试这个方案
回复

使用道具 举报

发表于 2012-3-7 22:41:56 | 显示全部楼层
为什么我下载的镜像文件解压缩后大小是0kb?    下了2次都是这样  

大家遇到过吗?   ~~求解

LINUX.jpg
回复

使用道具 举报

发表于 2012-3-7 22:43:49 | 显示全部楼层
本帖最后由 superTWT 于 2012-3-7 22:49 编辑

原来是WINRAR的版本低了   我也不知道哪弄来的3.8版   居然不是最新版

评分

参与人数 1基本分 +5 收起 理由
金鹏 + 5 兄弟牛

查看全部评分

回复

使用道具 举报

发表于 2012-3-8 18:34:58 | 显示全部楼层
仔细拜读了金版的教程    并严格执行   顺利开跑。

1230目前跑了一天,PPD基本稳定在14.5k+

教程中的补充的补丁内容还没有更新,有空了再整。

不知道现在这种状况是否正常
回复

使用道具 举报

 楼主| 发表于 2012-3-8 19:59:53 | 显示全部楼层
回复 89# superTWT

升级到Kernel 3.0.1 BFS 406版本,其它不用.

如果兄弟超到3.6G+建议使用神医教程把1230模拟成12T,开跑BIGADV,会取得50K+PPD
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~
欢迎大家多多支持基金会~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2024-4-18 20:58

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表