论坛 › English Section › [求助]About your working speed on SETI

free00701 发表于 2004-10-20 00:00:00

[求助]About your working speed on SETI

After I have been browsing this forum for a while, I noticed that all of you can finish off a WU in just a peroid of short time <5 hrs. But my working time will be about 30 hrs =.=. I am wondering how can you be so fast, so can anybody teach me how to increase my working speed?
My config:
Asus P4B266C
Intel Northwood 2.0Ghz oc 2.28Ghz
TWO 256MB ram=512 MB (333mhz, non-dual)
Inno3d GF5500
Maxtor 8mb 80GB
Win XP SP1
CAN ANYBOSY HELP ME PLZ... I wanna help SETI

t_maple 发表于 2004-10-22 00:00:00

can you list your configuration of SETI?

JPU风色 发表于 2004-11-26 22:00:25

SETI@Home Client is independent of VGA card maybe

equn 发表于 2004-11-26 23:19:18

Well, for a CPU like Intel Northwood 2.0Ghz oc 2.28Ghz, a WU will normally be finished in 3 hours.

equn 发表于 2004-11-26 23:20:51

So, you may have ran other programs which occupy much computing ability.

fg32152128 发表于 2005-2-19 21:41:55

My configuration:
CPU:C1.7G
RAM:256M
My rate:7.5h/wu

慢舟 发表于 2005-2-21 08:20:34

U`re using SETI@home for windows.

fg32152128 发表于 2005-2-21 20:54:29

I used commandline version!

阿pp 发表于 2005-2-27 18:49:34

CPU:Centrino 1.6GHz
RAM:512MB
OS:Windows XP SP2

rate:2.25 hour/wu

Youth 发表于 2005-3-17 15:21:33

use commandline version
use faster cpu
run it all the time when your computer is up
then no need to worry about the speed

Youth 发表于 2005-3-17 15:23:07

P4 2.8E (Prescott, HT enabled)
about 2wus/3hrs

查看完整版本: [求助]About your working speed on SETI