客户端更新V7.6.21
本帖最后由 vmzy 于 2020-10-25 09:08 编辑New Client Released - V7.6.21
Please note that the latest version of the client has been released: V7.6.21
You can download it from here: https://download.foldingathome.org/releases/public/release/fah-installer/windows-10-32bit/v7.6/fah-installer_7.6.21_x86.exe
https://download.foldingathome.o ... ease/
Please note that the folding performance will not change as that is dependent on FahCore which remains the same across V7.4.X, V7.5.X and V7.6.X
Changelog for V7.6.21:
Folding@home Client Changelog
=============================
## v7.6.20
## v7.6.19
- Prevent deleted or disabled slot from getting WUs.
## v7.6.18
- Removed unnecessary debian deps on bzip2 and zlib1g.
- Fixed GPU slot initialization problem.
- Fix start up failure when OpenCL is not present.
- Fixed GPU allocation bug from v7.6.17
## v7.6.17
- Added ``auto-conf`` option.Set false to disable auto slot config.
## v7.6.16
- Automatically enable unrecognized GPUs w/ OpenCL 1.2 support in beta.
- Try to automatically match GPU to OpenCL/CUDA devices wo/ PCI info.
## v7.6.15
- Fixed slot allocation bug.
- Disable GPU species 1 unless ``gpu-beta`` flag is enabled.
- ID GPU devices by ``pci-bus`` and ``pci-slot`` rather than ``gpu-index``.
## v7.6.14
- Detect GPUs before initializing modules.
- Improved GPU detection.
- Enable "finish" from Web client.#1415, #1352
- Don't try to download new WU if slot is paused or finishing.#1399, #1375
- Fix windows non-admin install. #1398
- Windows install client for all users.#1409, #1380
## v7.6.13
- Wait to print info blocks to log until after GPUs are detected.
## v7.6.12
- Don't download GPUs.txt when using ``--send-command``.
- Fixed GPUs.txt timestamp check.
## v7.6.11
- Reduce max delay from 6 hours to 1.
## v7.6.10
- Fix data dir removal confirmation message in Windows.
- Download GPUs.txt at startup before configuring the slots.
## v7.6.8
- Remove bug submission dialog, point to GitHub instead
- Use PUT instead of GET to access web session ID.Probably more secure.
## v7.6.7
- Make sure Web control gets opened when requested.
## v7.6.6
- Fix ``slot-options`` command response header
## v7.6.5
- Always allow 127.0.0.1 access to web server.
- Update GPUs.txt even if GPUs are not currently enabled.
- Instead of altering data dir in Windows, confirm removal.
- Remove unsupported windows themes on install.
## v7.6.4
- Make sure Windows data directory ends with ``\FAHClient``.
- Fix Linux service shutdown.
- Avoid caching old Web interface.
- Fix for Windows service install.
- Fix Windows start menu.
## v7.6.3
- Organize info blocks
## v7.6.1
- Mask newer GLIBC calls for better Linux compatibility.
- Add COVID-19 option.
- Hardened command server and Web interface security.
注：
由于gpu相关部分改动过大。建议升级客户端前，先算完当前任务以免浪费算力。
建议小水管志愿者先行试用，然后农场主再更新。 本帖最后由 金鹏 于 2020-10-30 07:05 编辑
保持当前的设置和参数及计算进度等不变的偷懒方法：安装前备份 config.xml 、work 、themes 、cores 、configs等文件，安装后覆盖回去
注意：已发现WIN10_2004版下使用代理时会出现不能最终上传计算结果的BUG，不建议WIN10该版本用户升级到7.6.21
ALTERNATIVE DOWNLOADS
https://download.foldingathome.org/images/guide.pngWindows (All versions, 32 & 64 bit)
https://download.foldingathome.org/images/windows.png
Windows
[*]https://download.foldingathome.org/images/download.pngfah-installer_7.6.21_x86.exe
https://download.foldingathome.org/images/guide.pngmacOS (10.7+)
https://download.foldingathome.org/images/macos.png
macOS
[*]https://download.foldingathome.org/images/download.pngfah-installer_7.6.21_x86_64.mpkg.zip
https://download.foldingathome.org/images/guide.png64bit Linux (.deb + .rpm)
https://download.foldingathome.org/images/debian.pnghttps://download.foldingathome.org/images/mint.pnghttps://download.foldingathome.org/images/ubuntu.png
Debian / Mint / Ubuntu
[*]https://download.foldingathome.org/images/download.pngfahclient_7.6.21_amd64.deb
[*]https://download.foldingathome.org/images/download.pngfahcontrol_7.6.21-1_all.deb
[*]https://download.foldingathome.org/images/download.pngfahviewer_7.6.21_amd64.deb
https://download.foldingathome.org/images/redhat.pnghttps://download.foldingathome.org/images/centos.pnghttps://download.foldingathome.org/images/fedora.png
Redhat / Centos / Fedora
[*]https://download.foldingathome.org/images/download.pngfahclient-7.6.21-1.x86_64.rpm
[*]https://download.foldingathome.org/images/download.pngfahcontrol-7.6.21-1.noarch.rpm
[*]https://download.foldingathome.org/images/download.pngfahviewer-7.6.21-1.x86_64.rpm
https://download.foldingathome.org/images/arm_linux.pnghttps://download.foldingathome.org/images/raspberry_pi.png
ARM Linux / Raspberry Pi
[*]https://download.foldingathome.org/images/download.pngfahclient_7.6.21_arm64.deb
[*]https://download.foldingathome.org/images/download.pngfahcontrol_7.6.21-1_all.deb
[*]https://download.foldingathome.org/images/download.pngfahviewer_7.6.21_arm64.deb
ADDITIONAL PLATFORMSDocker for GPUsvSphere
啥时候能屯包就好了 为啥我这里下载到30%就卡死然后报错》（-）《 已下载……感谢分享…… 话说mac现在跑fah的能力如何 有没有hxd测试过 金鹏 发表于 2020-10-25 10:36
保持当前的设置和参数及计算进度等不变的偷懒方法：安装前备份 config.xml 、work 、themes 、cores 、conf ...
这行红字看的我眼泪出来了
lewis33 发表于 2020-10-28 17:28
这行红字看的我眼泪出来了
我偶尔碰到不能上传，换个节点就好了
我还是7.6.13一看都7.6.21了 昨天升级21,发现status不能正常工作，明明有进程在跑阿。求助！OS：Ubuntu20
sudo /etc/init.d/FAHClient log
00:44:40:WU01:FS00:0x22:Completed 270000 out of 1000000 steps (27%)
00:45:00:WU02:FS01:0x22:Completed 670000 out of 1000000 steps (67%)
00:45:55:WU01:FS00:0x22:Completed 280000 out of 1000000 steps (28%)
00:46:16:WU02:FS01:0x22:Completed 680000 out of 1000000 steps (68%)
00:47:11:WU01:FS00:0x22:Completed 290000 out of 1000000 steps (29%)
00:47:32:WU02:FS01:0x22:Completed 690000 out of 1000000 steps (69%)
00:48:26:WU01:FS00:0x22:Completed 300000 out of 1000000 steps (30%)
00:48:27:WU01:FS00:0x22:Checkpoint completed at step 300000
00:48:48:WU02:FS01:0x22:Completed 700000 out of 1000000 steps (70%)
00:48:49:WU02:FS01:0x22:Checkpoint completed at step 700000
sudo /etc/init.d/FAHClient status
fahclient is not running rap_silen 发表于 2021-5-11 08:52
昨天升级21,发现status不能正常工作，明明有进程在跑阿。求助！OS：Ubuntu20
sudo /etc/init.d/FAHClient l ...
是不是进程名字变了，你看下 /etc/init.d/FAHClient 脚本里面是怎么处理 status 请求的。
然后再 ps -ef 看一下进程的名字是不是和脚本里面匹配的。
0xCAFEBABE 发表于 2021-5-11 09:15
是不是进程名字变了，你看下 /etc/init.d/FAHClient 脚本里面是怎么处理 status 请求的。
然后再 ps -ef...
脚本里使用下面的语句获取pid,但实际根本没有这个文件,不知道是不是权限不够没能产生。已经把fahclient添加为sudoers
NAME=fahclient
PID=/var/run/$NAME.pid
get_pid() {
cat $PID
}
ps -ef|grep fahclient
root 7471 10 08:29 pts/0 00:00:01 /usr/bin/FAHClient /etc/fahclient/config.xml --run-as fahclient --pid-file=/var/run/fahclient.pid --daemon
root 7482 74710 08:29 pts/0 00:00:07 /usr/bin/FAHClient --child /etc/fahclient/config.xml --run-as fahclient --pid-file=/var/run/fahclient.pid --daemon
root 7492 74820 08:29 pts/0 00:00:00 /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit/22-0.0.13/Core_22.fah/FahCore_22 -dir 02 -suffix 01 -version 706 -lifeline 7482 -checkpoint 3 -opencl-platform 0 -opencl-device 1 -cuda-device 1 -gpu-vendor nvidia -gpu 1 -gpu-usage 100
root 7496 7492 99 08:29 pts/0 00:52:59 /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit/22-0.0.13/Core_22.fah/FahCore_22 -dir 02 -suffix 01 -version 706 -lifeline 7492 -checkpoint 3 -opencl-platform 0 -opencl-device 1 -cuda-device 1 -gpu-vendor nvidia -gpu 1 -gpu-usage 100
root 7499 74820 08:29 pts/0 00:00:00 /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit/22-0.0.13/Core_22.fah/FahCore_22 -dir 01 -suffix 01 -version 706 -lifeline 7482 -checkpoint 3 -opencl-platform 0 -opencl-device 0 -cuda-device 0 -gpu-vendor nvidia -gpu 0 -gpu-usage 100
root 7503 7499 99 08:29 pts/0 00:52:57 /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit/22-0.0.13/Core_22.fah/FahCore_22 -dir 01 -suffix 01 -version 706 -lifeline 7499 -checkpoint 3 -opencl-platform 0 -opencl-device 0 -cuda-device 0 -gpu-vendor nvidia -gpu 0 -gpu-usage 100
tdni 7810 18860 09:22 pts/0 00:00:00 grep --color=auto fahclient
tdni@XX:~$ l /var/run/fahclient.pid
ls: cannot access '/var/run/fahclient.pid': No such file or directory
似乎是pid文件没有正常生成的问题，在启动脚本里添加之后解决了 7.6.21各种bug，早就回退到7.6.13了 牵牛星 发表于 2021-5-11 13:21
7.6.21各种bug，早就回退到7.6.13了
页:
[1]
