找回密码
 新注册用户
搜索
查看: 5569|回复: 14

[原创] 集成+独立显卡,开蛋白质计算出错的解决方法

[复制链接]
发表于 2012-3-27 21:40:57 | 显示全部楼层 |阅读模式
本帖最后由 jiaxinbing 于 2012-4-6 17:53 编辑

症状:七彩虹n78u x5,mcp78u的板子,集成730a显卡,加一块8800gt,双卡进系统没问题,双卡显示扩展桌面都可以,就是没发打开蛋白质计算,显示显卡不支持或驱动不对的对话框(程序这时说的是730a不支持)。

因为,我另有一台nf4sli插两块不同型号显卡,有成功使用经历,慢的显卡用来桌面加速,快得显卡扩展桌面,玩游戏或算蛋白质时系统会自动用快得那块显卡,慢的那块是不参与,所以想来试试看能不能也这样用。
可是,驱动装了无数遍,给程序加上强制gpu命令也试了,都无效,只能关了内置的730a,只用外置一切回复正常。

解决方法:最后,经多次调试,两显卡同时使用的方法是:第一步:bios里设置内外部显卡都打开,设置内部显卡优先启动都可以,设置智能sli为关闭;第二部:启动系统,正常装驱动(切记:驱动一定要装完整的包含显卡驱动的主板驱动包,不要单独装最新的显卡驱动,不然算蛋白质会出问题,无法自动延续),装完驱动重启,再到控制面板-显示里给外置显卡扩展桌面(操作系统在win7以下的需要两个显卡都接上显示器),然后运行蛋白质运算。这时,主板自带的内置显卡用来给桌面应用加速,蛋白质计算会自动放到外置显卡上,两个显卡互不干扰,各干各的。

经进一步测试,玩3D游戏必须用外置显卡优先启动并关闭内置显卡才行。在系统里把主桌面从内置卡改外置卡玩游戏行不通。这一点上mcp78u不如sli的主板,用sli主板操作系统可以自动选择性能强的显卡运行游戏。

评分

参与人数 1基本分 +10 收起 理由
金鹏 + 10 我很赞同

查看全部评分

回复

使用道具 举报

发表于 2012-3-27 22:04:21 | 显示全部楼层
我是在因特尔集成显卡的板子上,进入BIOS强制优先使用内置显卡显示,开启能使用PEG,进入系统后给PCIE显卡安装驱动,然后重启,进入系统后把当前桌面扩展到PCIE显卡上,就能使用CUDA跑GPU3客户端了。
回复

使用道具 举报

 楼主| 发表于 2012-3-27 22:48:38 | 显示全部楼层
嗯,还是这么用起来顺道,浏览器显卡加速,影视播放都不受影响,也符合@home的宗旨,不影响正常使用的情况下做贡献
回复

使用道具 举报

发表于 2012-3-28 08:57:42 | 显示全部楼层
你的办法好,值得推广
回复

使用道具 举报

 楼主| 发表于 2012-4-4 10:27:41 | 显示全部楼层
回复 2# 金鹏


       要请教个问题,我用GPU3免安装版V6.41r2_Systray版,在这台mcp78u上一直不稳定,接包后如果能顺利Starting GUI Server就会一直算不出错,但有可能只算完一个包就停了,也有可能算3-4个也不会停,56**的包特别容易停,1050*的就不会停,停的时候显示NANs detected on GPU,要整个文件夹删掉重新解压新的出来才行,有时要试好几遍才行,有时怎么试也不行。您给看看这是啥问题啊?
     我试过关了集成显卡,试过重装驱动,都一个样没变化
回复

使用道具 举报

发表于 2012-4-4 13:33:28 | 显示全部楼层
回复 5# jiaxinbing

兄弟驱动不要用最新版的,一般260.99比较稳定,另外系统DX升级到最新版。

碰到高温包时做好显卡的散热
回复

使用道具 举报

发表于 2012-4-4 16:57:11 | 显示全部楼层
mcp7x的主板必须要跳线,文章我先找一下.
回复

使用道具 举报

发表于 2012-4-4 17:00:04 | 显示全部楼层
找到了,原理和扩展桌面不需要接双屏显示器一样,要自己动下手:
http://tech.sina.com.cn/h/2008-10-16/10582513785.shtml

之前上E5200的时候也考虑过MCP7A的主板,可惜一直到P4x退出历史舞台,好超频的MCP7A的主板都高居不下。
回复

使用道具 举报

 楼主| 发表于 2012-4-4 18:29:58 | 显示全部楼层
回复 8# alen


    我的问题是在这个问题已经解决的基础之上出现的新问题,现在看驱动的问题可能性最高!
回复

使用道具 举报

发表于 2012-4-7 22:15:33 | 显示全部楼层
最简单的方法,就把集显屏蔽了吧。负面影响很大?
回复

使用道具 举报

 楼主| 发表于 2012-4-7 22:47:44 | 显示全部楼层
回复 10# litimetal


    负面影响怎么说那,对ppd没影响,但用了这段时间感觉不太稳定,主要是算完某个包后有可能自动停下,需要关了蛋白质程序重开就好了,也就是要人盯着,所以只能做日常使用的电脑,不能当无人看管的跑分机。
回复

使用道具 举报

 楼主| 发表于 2012-4-11 22:28:06 | 显示全部楼层
回复 6# 金鹏


    金版,求您给分析一下我这是遇到什么情况了。还是这台集成+独立显卡机器,装了197.13的驱动后,好了那么几天,现在有开始出错了。症状是:正常算完一个包,下一个包接收也正常,但无法启动核心,好像三次以后就eue了。软件关掉再开一般不好用,需要另换个文件夹,开新软件就好用。这几天我都这么两个foiding文件夹轮换着开着用的。

[14:04:52] - Preparing to get new work unit...
[14:04:52] Cleaning up work directory
[14:04:52] + Attempting to get work packet
[14:04:52] Gpu type=2 species=11.
[14:04:52] - Connecting to assignment server
[14:04:53] - Successful: assigned to (171.67.108.11).
[14:04:53] + News From Folding@Home: Welcome to Folding@Home
[14:04:54] Loaded queue successfully.
[14:04:54] Gpu type=2 species=11.
[14:04:56] + Closed connections
[14:04:56]
[14:04:56] + Processing work unit
[14:04:56] Core required: FahCore_11.exe
[14:04:56] Core found.
[14:04:56] Working on queue slot 05 [April 11 14:04:56 UTC]
[14:04:56] + Working ...
[14:04:57]
[14:04:57] *------------------------------*
[14:04:57] Folding@Home GPU Core
[14:04:57] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[14:04:57]
[14:04:57] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[14:04:57] Build host: amoeba
[14:04:57] Board Type: Nvidia
[14:04:57] Core      :
[14:04:57] Preparing to commence simulation
[14:04:57] - Looking at optimizations...
[14:04:57] DeleteFrameFiles: successfully deleted file=work/wudata_05.ckp
[14:04:57] - Created dyn
[14:04:57] - Files status OK
[14:04:58] - Expanded 46720 -> 252912 (decompressed 541.3 percent)
[14:04:58] Called DecompressByteArray: compressed_data_size=46720 data_size=252912, decompressed_data_size=252912 diff=0
[14:04:58] - Digital signature verified
[14:04:58]
[14:04:58] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:04:58]
[14:04:58] Assembly optimizations on if available.
[14:04:58] Entering M.D.
[14:05:04] Tpr hash work/wudata_05.tpr:  393627794 819901643 2063726837 3398061976 798807139
[14:05:04]
[14:05:04] Calling fah_main args: 14 usage=100
[14:05:04]
[14:05:04] Working on Protein
[14:05:05] Client config found, loading data.
[14:05:05] mdrun_gpu returned
[14:05:05] NANs detected on GPU
[14:05:05]
[14:05:05] Folding@home Core Shutdown: UNSTABLE_MACHINE
[14:05:08] CoreStatus = 7A (122)
[14:05:08] Sending work to server
[14:05:08] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:05:08] - Read packet limit of 540015616... Set to 524286976.
[14:05:08] - Error: Could not get length of results file work/wuresults_05.dat
[14:05:08] - Error: Could not read unit 05 file. Removing from queue.
[14:05:08] - Preparing to get new work unit...
[14:05:08] Cleaning up work directory
[14:05:08] + Attempting to get work packet
[14:05:08] Gpu type=2 species=11.
[14:05:08] - Connecting to assignment server
[14:05:09] - Successful: assigned to (171.67.108.11).
[14:05:09] + News From Folding@Home: Welcome to Folding@Home
[14:05:10] Loaded queue successfully.
[14:05:10] Gpu type=2 species=11.
[14:05:12] + Closed connections
[14:05:17]
[14:05:17] + Processing work unit
[14:05:17] Core required: FahCore_11.exe
[14:05:17] Core found.
[14:05:17] Working on queue slot 06 [April 11 14:05:17 UTC]
[14:05:17] + Working ...
[14:05:19]
[14:05:19] *------------------------------*
[14:05:19] Folding@Home GPU Core
[14:05:19] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[14:05:19]
[14:05:19] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[14:05:19] Build host: amoeba
[14:05:19] Board Type: Nvidia
[14:05:19] Core      :
[14:05:19] Preparing to commence simulation
[14:05:19] - Looking at optimizations...
[14:05:19] DeleteFrameFiles: successfully deleted file=work/wudata_06.ckp
[14:05:19] - Created dyn
[14:05:19] - Files status OK
[14:05:19] - Expanded 46720 -> 252912 (decompressed 541.3 percent)
[14:05:19] Called DecompressByteArray: compressed_data_size=46720 data_size=252912, decompressed_data_size=252912 diff=0
[14:05:19] - Digital signature verified
[14:05:19]
[14:05:19] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:05:19]
[14:05:19] Assembly optimizations on if available.
[14:05:19] Entering M.D.
[14:05:25] Tpr hash work/wudata_06.tpr:  393627794 819901643 2063726837 3398061976 798807139
[14:05:25]
[14:05:25] Calling fah_main args: 14 usage=100
[14:05:25]
[14:05:25] Working on Protein
[14:05:26] Client config found, loading data.
[14:05:26] mdrun_gpu returned
[14:05:26] NANs detected on GPU
[14:05:26]
[14:05:26] Folding@home Core Shutdown: UNSTABLE_MACHINE
[14:05:29] CoreStatus = 7A (122)
[14:05:29] Sending work to server
[14:05:29] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:05:29] - Read packet limit of 540015616... Set to 524286976.
[14:05:29] - Error: Could not get length of results file work/wuresults_06.dat
[14:05:29] - Error: Could not read unit 06 file. Removing from queue.
[14:05:29] - Preparing to get new work unit...
[14:05:29] Cleaning up work directory
[14:05:29] + Attempting to get work packet
[14:05:29] Gpu type=2 species=11.
[14:05:29] - Connecting to assignment server
[14:05:30] - Successful: assigned to (171.67.108.11).
[14:05:30] + News From Folding@Home: Welcome to Folding@Home
[14:05:31] Loaded queue successfully.
[14:05:31] Gpu type=2 species=11.
[14:05:34] + Closed connections
[14:05:39]
[14:05:39] + Processing work unit
[14:05:39] Core required: FahCore_11.exe
[14:05:39] Core found.
[14:05:39] Working on queue slot 07 [April 11 14:05:39 UTC]
[14:05:39] + Working ...
[14:05:40]
[14:05:40] *------------------------------*
[14:05:40] Folding@Home GPU Core
[14:05:40] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[14:05:40]
[14:05:40] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[14:05:40] Build host: amoeba
[14:05:40] Board Type: Nvidia
[14:05:40] Core      :
[14:05:40] Preparing to commence simulation
[14:05:40] - Looking at optimizations...
[14:05:40] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[14:05:40] - Created dyn
[14:05:40] - Files status OK
[14:05:40] - Expanded 46720 -> 252912 (decompressed 541.3 percent)
[14:05:40] Called DecompressByteArray: compressed_data_size=46720 data_size=252912, decompressed_data_size=252912 diff=0
[14:05:40] - Digital signature verified
[14:05:40]
[14:05:40] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:05:40]
[14:05:40] Assembly optimizations on if available.
[14:05:40] Entering M.D.
[14:05:46] Tpr hash work/wudata_07.tpr:  393627794 819901643 2063726837 3398061976 798807139
[14:05:46]
[14:05:46] Calling fah_main args: 14 usage=100
[14:05:46]
[14:05:47] Working on Protein
[14:05:47] Client config found, loading data.
[14:05:47] mdrun_gpu returned
[14:05:47] NANs detected on GPU
[14:05:47]
[14:05:47] Folding@home Core Shutdown: UNSTABLE_MACHINE
[14:05:50] CoreStatus = 7A (122)
[14:05:50] Sending work to server
[14:05:50] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:05:50] - Read packet limit of 540015616... Set to 524286976.
[14:05:50] - Error: Could not get length of results file work/wuresults_07.dat
[14:05:50] - Error: Could not read unit 07 file. Removing from queue.
[14:05:50] - Preparing to get new work unit...
[14:05:50] Cleaning up work directory
[14:05:50] + Attempting to get work packet
[14:05:50] Gpu type=2 species=11.
[14:05:50] - Connecting to assignment server
[14:05:51] - Successful: assigned to (171.67.108.11).
[14:05:51] + News From Folding@Home: Welcome to Folding@Home
[14:05:51] Loaded queue successfully.
[14:05:51] Gpu type=2 species=11.
[14:05:54] + Closed connections
[14:05:59]
[14:05:59] + Processing work unit
[14:05:59] Core required: FahCore_11.exe
[14:05:59] Core found.
[14:05:59] Working on queue slot 08 [April 11 14:05:59 UTC]
[14:05:59] + Working ...
[14:06:00]
[14:06:00] *------------------------------*
[14:06:00] Folding@Home GPU Core
[14:06:00] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[14:06:00]
[14:06:00] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[14:06:00] Build host: amoeba
[14:06:00] Board Type: Nvidia
[14:06:00] Core      :
[14:06:00] Preparing to commence simulation
[14:06:00] - Looking at optimizations...
[14:06:00] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[14:06:00] - Created dyn
[14:06:00] - Files status OK
[14:06:01] - Expanded 46720 -> 252912 (decompressed 541.3 percent)
[14:06:01] Called DecompressByteArray: compressed_data_size=46720 data_size=252912, decompressed_data_size=252912 diff=0
[14:06:01] - Digital signature verified
[14:06:01]
[14:06:01] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:06:01]
[14:06:01] Assembly optimizations on if available.
[14:06:01] Entering M.D.
[14:06:07] Tpr hash work/wudata_08.tpr:  393627794 819901643 2063726837 3398061976 798807139
[14:06:07]
[14:06:07] Calling fah_main args: 14 usage=100
[14:06:07]
[14:06:07] Working on Protein
[14:06:08] Client config found, loading data.
[14:06:08] mdrun_gpu returned
[14:06:08] NANs detected on GPU
[14:06:08]
[14:06:08] Folding@home Core Shutdown: UNSTABLE_MACHINE
[14:06:11] CoreStatus = 7A (122)
[14:06:11] Sending work to server
[14:06:11] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:06:11] - Read packet limit of 540015616... Set to 524286976.
[14:06:11] - Error: Could not get length of results file work/wuresults_08.dat
[14:06:11] - Error: Could not read unit 08 file. Removing from queue.
[14:06:11] - Preparing to get new work unit...
[14:06:11] Cleaning up work directory
[14:06:11] + Attempting to get work packet
[14:06:11] Gpu type=2 species=11.
[14:06:11] - Connecting to assignment server
[14:06:12] - Successful: assigned to (171.67.108.11).
[14:06:12] + News From Folding@Home: Welcome to Folding@Home
[14:06:12] Loaded queue successfully.
[14:06:12] Gpu type=2 species=11.
[14:06:15] + Closed connections
[14:06:20]
[14:06:20] + Processing work unit
[14:06:20] Core required: FahCore_11.exe
[14:06:20] Core found.
[14:06:20] Working on queue slot 09 [April 11 14:06:20 UTC]
[14:06:20] + Working ...
[14:06:21]
[14:06:21] *------------------------------*
[14:06:21] Folding@Home GPU Core
[14:06:22] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[14:06:22]
[14:06:22] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[14:06:22] Build host: amoeba
[14:06:22] Board Type: Nvidia
[14:06:22] Core      :
[14:06:22] Preparing to commence simulation
[14:06:22] - Looking at optimizations...
[14:06:22] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[14:06:22] - Created dyn
[14:06:22] - Files status OK
[14:06:22] - Expanded 46720 -> 252912 (decompressed 541.3 percent)
[14:06:22] Called DecompressByteArray: compressed_data_size=46720 data_size=252912, decompressed_data_size=252912 diff=0
[14:06:22] - Digital signature verified
[14:06:22]
[14:06:22] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:06:22]
[14:06:22] Assembly optimizations on if available.
[14:06:22] Entering M.D.
[14:06:28] Tpr hash work/wudata_09.tpr:  393627794 819901643 2063726837 3398061976 798807139
[14:06:28]
[14:06:28] Calling fah_main args: 14 usage=100
[14:06:28]
[14:06:28] Working on Protein
[14:06:29] Client config found, loading data.
[14:06:29] mdrun_gpu returned
[14:06:29] NANs detected on GPU
[14:06:29]
[14:06:29] Folding@home Core Shutdown: UNSTABLE_MACHINE
[14:06:32] CoreStatus = 7A (122)
[14:06:32] Sending work to server
[14:06:32] Project: 5766 (Run 6, Clone 78, Gen 2695)
[14:06:32] - Read packet limit of 540015616... Set to 524286976.
[14:06:32] - Error: Could not get length of results file work/wuresults_09.dat
[14:06:32] - Error: Could not read unit 09 file. Removing from queue.
[14:06:32] EUE limit exceeded. Pausing 24 hours.
回复

使用道具 举报

 楼主| 发表于 2012-4-11 23:59:49 | 显示全部楼层
出错后换一个文件夹打开程序,计算完成后,换回原来的文件夹打开就可以开始新的计算:

[14:06:32] EUE limit exceeded. Pausing 24 hours.

Folding@Home Client Shutdown.


--- Opening Log file [April 11 15:50:11 UTC]


# Windows GPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.41r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: E:\GPU3Ãâ°²×°°æ1


[15:50:11] - Ask before connecting: No
[15:50:11] - User name: jiaxinbing (Team 3213)
[15:50:11] - User ID: 28D412FC709EDD37
[15:50:11] - Machine ID: 1
[15:50:11]
[15:50:11] Gpu type=2 species=11.
[15:50:11] Loaded queue successfully.
[15:50:11] Initialization complete
[15:50:11] - Preparing to get new work unit...
[15:50:11] Cleaning up work directory
[15:50:11] + Attempting to get work packet
[15:50:11] Gpu type=2 species=11.
[15:50:11] - Connecting to assignment server
[15:50:13] - Successful: assigned to (171.67.108.11).
[15:50:13] + News From Folding@Home: Welcome to Folding@Home
[15:50:13] Loaded queue successfully.
[15:50:13] Gpu type=2 species=11.
[15:50:14] + Closed connections
[15:50:14]
[15:50:14] + Processing work unit
[15:50:14] Core required: FahCore_11.exe
[15:50:14] Core found.
[15:50:14] Working on queue slot 00 [April 11 15:50:14 UTC]
[15:50:14] + Working ...
[15:50:16]
[15:50:16] *------------------------------*
[15:50:16] Folding@Home GPU Core
[15:50:16] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[15:50:16]
[15:50:16] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[15:50:16] Build host: amoeba
[15:50:16] Board Type: Nvidia
[15:50:16] Core      :
[15:50:16] Preparing to commence simulation
[15:50:16] - Looking at optimizations...
[15:50:16] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp
[15:50:16] - Created dyn
[15:50:16] - Files status OK
[15:50:16] - Expanded 45363 -> 251112 (decompressed 553.5 percent)
[15:50:16] Called DecompressByteArray: compressed_data_size=45363 data_size=251112, decompressed_data_size=251112 diff=0
[15:50:16] - Digital signature verified
[15:50:16]
[15:50:16] Project: 5771 (Run 14, Clone 306, Gen 2047)
[15:50:16]
[15:50:16] Assembly optimizations on if available.
[15:50:16] Entering M.D.
[15:50:22] Tpr hash work/wudata_00.tpr:  313252687 3180403944 3059925011 1288646811 55359848
[15:50:22]
[15:50:22] Calling fah_main args: 14 usage=100
[15:50:22]
[15:50:23] Working on Protein
[15:50:23] Client config found, loading data.
[15:50:24] Starting GUI Server
[15:51:15] Completed 1%
回复

使用道具 举报

发表于 2012-4-12 20:48:40 | 显示全部楼层
非要用乱码文件夹嘛?
回复

使用道具 举报

 楼主| 发表于 2012-4-12 21:04:51 | 显示全部楼层
本帖最后由 jiaxinbing 于 2012-4-13 21:05 编辑

回复 14# vmzy


    是那免安装版自己解压的文件夹.

    改成全字母文件夹试了两天,还是出错,没有改变。

Launch directory: E:\GPU2


[12:54:32] - Ask before connecting: No
[12:54:32] - User name: jiaxinbing (Team 3213)
[12:54:32] - User ID: 28D412FC709EDD37
[12:54:32] - Machine ID: 2
[12:54:32]
[12:54:32] Gpu type=2 species=11.
[12:54:33] Loaded queue successfully.
[12:54:33] Initialization complete
[12:54:33] - Preparing to get new work unit...
[12:54:33] Cleaning up work directory
[12:54:33] + Attempting to get work packet
[12:54:33] Gpu type=2 species=11.
[12:54:33] - Connecting to assignment server
[12:54:34] - Successful: assigned to (171.67.108.11).
[12:54:34] + News From Folding@Home: Welcome to Folding@Home
[12:54:34] Loaded queue successfully.
[12:54:34] Gpu type=2 species=11.
[12:54:36] + Closed connections
[12:54:36]
[12:54:36] + Processing work unit
[12:54:36] Core required: FahCore_11.exe
[12:54:36] Core found.
[12:54:37] Working on queue slot 07 [April 13 12:54:37 UTC]
[12:54:37] + Working ...
[12:54:38]
[12:54:38] *------------------------------*
[12:54:38] Folding@Home GPU Core
[12:54:38] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[12:54:38]
[12:54:38] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[12:54:38] Build host: amoeba
[12:54:38] Board Type: Nvidia
[12:54:38] Core      :
[12:54:38] Preparing to commence simulation
[12:54:38] - Looking at optimizations...
[12:54:38] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[12:54:38] - Created dyn
[12:54:38] - Files status OK
[12:54:38] - Expanded 46679 -> 252912 (decompressed 541.8 percent)
[12:54:38] Called DecompressByteArray: compressed_data_size=46679 data_size=252912, decompressed_data_size=252912 diff=0
[12:54:38] - Digital signature verified
[12:54:38]
[12:54:38] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:54:38]
[12:54:38] Assembly optimizations on if available.
[12:54:38] Entering M.D.
[12:54:44] Tpr hash work/wudata_07.tpr:  685682434 1936299434 1771637969 668087038 4018993507
[12:54:44]
[12:54:44] Calling fah_main args: 14 usage=100
[12:54:44]
[12:54:44] Working on Protein
[12:54:45] Client config found, loading data.
[12:54:45] mdrun_gpu returned
[12:54:45] NANs detected on GPU
[12:54:45]
[12:54:45] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:54:48] CoreStatus = 7A (122)
[12:54:48] Sending work to server
[12:54:48] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:54:48] - Read packet limit of 540015616... Set to 524286976.
[12:54:48] - Error: Could not get length of results file work/wuresults_07.dat
[12:54:48] - Error: Could not read unit 07 file. Removing from queue.
[12:54:48] - Preparing to get new work unit...
[12:54:48] Cleaning up work directory
[12:54:48] + Attempting to get work packet
[12:54:48] Gpu type=2 species=11.
[12:54:48] - Connecting to assignment server
[12:54:49] - Successful: assigned to (171.67.108.11).
[12:54:49] + News From Folding@Home: Welcome to Folding@Home
[12:54:49] Loaded queue successfully.
[12:54:49] Gpu type=2 species=11.
[12:54:52] + Closed connections
[12:54:57]
[12:54:57] + Processing work unit
[12:54:57] Core required: FahCore_11.exe
[12:54:57] Core found.
[12:54:57] Working on queue slot 08 [April 13 12:54:57 UTC]
[12:54:57] + Working ...
[12:54:59]
[12:54:59] *------------------------------*
[12:54:59] Folding@Home GPU Core
[12:54:59] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[12:54:59]
[12:54:59] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[12:54:59] Build host: amoeba
[12:54:59] Board Type: Nvidia
[12:54:59] Core      :
[12:54:59] Preparing to commence simulation
[12:54:59] - Looking at optimizations...
[12:54:59] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[12:54:59] - Created dyn
[12:54:59] - Files status OK
[12:54:59] - Expanded 46679 -> 252912 (decompressed 541.8 percent)
[12:54:59] Called DecompressByteArray: compressed_data_size=46679 data_size=252912, decompressed_data_size=252912 diff=0
[12:54:59] - Digital signature verified
[12:54:59]
[12:54:59] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:54:59]
[12:54:59] Assembly optimizations on if available.
[12:54:59] Entering M.D.
[12:55:05] Tpr hash work/wudata_08.tpr:  685682434 1936299434 1771637969 668087038 4018993507
[12:55:05]
[12:55:05] Calling fah_main args: 14 usage=100
[12:55:05]
[12:55:05] Working on Protein
[12:55:06] Client config found, loading data.
[12:55:06] Starting GUI Server
[12:55:06] mdrun_gpu returned
[12:55:06] NANs detected on GPU
[12:55:06]
[12:55:06] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:55:09] CoreStatus = 7A (122)
[12:55:09] Sending work to server
[12:55:09] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:55:09] - Read packet limit of 540015616... Set to 524286976.
[12:55:09] - Error: Could not get length of results file work/wuresults_08.dat
[12:55:09] - Error: Could not read unit 08 file. Removing from queue.
[12:55:09] - Preparing to get new work unit...
[12:55:09] Cleaning up work directory
[12:55:09] + Attempting to get work packet
[12:55:09] Gpu type=2 species=11.
[12:55:09] - Connecting to assignment server
[12:55:10] - Successful: assigned to (171.67.108.11).
[12:55:10] + News From Folding@Home: Welcome to Folding@Home
[12:55:10] Loaded queue successfully.
[12:55:10] Gpu type=2 species=11.
[12:55:13] + Closed connections
[12:55:18]
[12:55:18] + Processing work unit
[12:55:18] Core required: FahCore_11.exe
[12:55:18] Core found.
[12:55:18] Working on queue slot 09 [April 13 12:55:18 UTC]
[12:55:18] + Working ...
[12:55:19]
[12:55:19] *------------------------------*
[12:55:19] Folding@Home GPU Core
[12:55:19] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[12:55:19]
[12:55:19] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[12:55:19] Build host: amoeba
[12:55:19] Board Type: Nvidia
[12:55:19] Core      :
[12:55:19] Preparing to commence simulation
[12:55:19] - Looking at optimizations...
[12:55:19] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[12:55:19] - Created dyn
[12:55:19] - Files status OK
[12:55:20] - Expanded 46679 -> 252912 (decompressed 541.8 percent)
[12:55:20] Called DecompressByteArray: compressed_data_size=46679 data_size=252912, decompressed_data_size=252912 diff=0
[12:55:20] - Digital signature verified
[12:55:20]
[12:55:20] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:55:20]
[12:55:20] Assembly optimizations on if available.
[12:55:20] Entering M.D.
[12:55:26] Tpr hash work/wudata_09.tpr:  685682434 1936299434 1771637969 668087038 4018993507
[12:55:26]
[12:55:26] Calling fah_main args: 14 usage=100
[12:55:26]
[12:55:26] Working on Protein
[12:55:27] Client config found, loading data.
[12:55:27] mdrun_gpu returned
[12:55:27] NANs detected on GPU
[12:55:27]
[12:55:27] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:55:29] CoreStatus = 7A (122)
[12:55:29] Sending work to server
[12:55:29] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:55:29] - Read packet limit of 540015616... Set to 524286976.
[12:55:29] - Error: Could not get length of results file work/wuresults_09.dat
[12:55:29] - Error: Could not read unit 09 file. Removing from queue.
[12:55:29] - Preparing to get new work unit...
[12:55:29] Cleaning up work directory
[12:55:29] + Attempting to get work packet
[12:55:29] Gpu type=2 species=11.
[12:55:29] - Connecting to assignment server
[12:55:30] - Successful: assigned to (171.67.108.11).
[12:55:30] + News From Folding@Home: Welcome to Folding@Home
[12:55:31] Loaded queue successfully.
[12:55:31] Gpu type=2 species=11.
[12:55:33] + Closed connections
[12:55:38]
[12:55:38] + Processing work unit
[12:55:38] Core required: FahCore_11.exe
[12:55:38] Core found.
[12:55:38] Working on queue slot 00 [April 13 12:55:38 UTC]
[12:55:38] + Working ...
[12:55:40]
[12:55:40] *------------------------------*
[12:55:40] Folding@Home GPU Core
[12:55:40] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[12:55:40]
[12:55:40] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[12:55:40] Build host: amoeba
[12:55:40] Board Type: Nvidia
[12:55:40] Core      :
[12:55:40] Preparing to commence simulation
[12:55:40] - Looking at optimizations...
[12:55:40] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp
[12:55:40] - Created dyn
[12:55:40] - Files status OK
[12:55:40] - Expanded 46679 -> 252912 (decompressed 541.8 percent)
[12:55:40] Called DecompressByteArray: compressed_data_size=46679 data_size=252912, decompressed_data_size=252912 diff=0
[12:55:40] - Digital signature verified
[12:55:40]
[12:55:40] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:55:40]
[12:55:40] Assembly optimizations on if available.
[12:55:40] Entering M.D.
[12:55:46] Tpr hash work/wudata_00.tpr:  685682434 1936299434 1771637969 668087038 4018993507
[12:55:46]
[12:55:46] Calling fah_main args: 14 usage=100
[12:55:46]
[12:55:46] Working on Protein
[12:55:47] Client config found, loading data.
[12:55:47] mdrun_gpu returned
[12:55:47] NANs detected on GPU
[12:55:47]
[12:55:47] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:55:50] CoreStatus = 7A (122)
[12:55:50] Sending work to server
[12:55:50] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:55:50] - Read packet limit of 540015616... Set to 524286976.
[12:55:50] - Error: Could not get length of results file work/wuresults_00.dat
[12:55:50] - Error: Could not read unit 00 file. Removing from queue.
[12:55:50] - Preparing to get new work unit...
[12:55:50] Cleaning up work directory
[12:55:50] + Attempting to get work packet
[12:55:50] Gpu type=2 species=11.
[12:55:50] - Connecting to assignment server
[12:55:51] - Successful: assigned to (171.67.108.11).
[12:55:51] + News From Folding@Home: Welcome to Folding@Home
[12:55:52] Loaded queue successfully.
[12:55:52] Gpu type=2 species=11.
[12:55:54] + Closed connections
[12:55:59]
[12:55:59] + Processing work unit
[12:55:59] Core required: FahCore_11.exe
[12:55:59] Core found.
[12:55:59] Working on queue slot 01 [April 13 12:55:59 UTC]
[12:55:59] + Working ...
[12:56:00]
[12:56:00] *------------------------------*
[12:56:00] Folding@Home GPU Core
[12:56:00] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[12:56:00]
[12:56:00] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[12:56:00] Build host: amoeba
[12:56:00] Board Type: Nvidia
[12:56:00] Core      :
[12:56:00] Preparing to commence simulation
[12:56:00] - Looking at optimizations...
[12:56:00] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[12:56:00] - Created dyn
[12:56:00] - Files status OK
[12:56:01] - Expanded 46679 -> 252912 (decompressed 541.8 percent)
[12:56:01] Called DecompressByteArray: compressed_data_size=46679 data_size=252912, decompressed_data_size=252912 diff=0
[12:56:01] - Digital signature verified
[12:56:01]
[12:56:01] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:56:01]
[12:56:01] Assembly optimizations on if available.
[12:56:01] Entering M.D.
[12:56:07] Tpr hash work/wudata_01.tpr:  685682434 1936299434 1771637969 668087038 4018993507
[12:56:07]
[12:56:07] Calling fah_main args: 14 usage=100
[12:56:07]
[12:56:07] Working on Protein
[12:56:08] Client config found, loading data.
[12:56:08] Starting GUI Server
[12:56:08] mdrun_gpu returned
[12:56:08] NANs detected on GPU
[12:56:08]
[12:56:08] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:56:11] CoreStatus = 7A (122)
[12:56:11] Sending work to server
[12:56:11] Project: 5766 (Run 10, Clone 438, Gen 1330)
[12:56:11] - Read packet limit of 540015616... Set to 524286976.
[12:56:11] - Error: Could not get length of results file work/wuresults_01.dat
[12:56:11] - Error: Could not read unit 01 file. Removing from queue.
[12:56:11] EUE limit exceeded. Pausing 24 hours.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2024-4-29 22:38

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表