中国分布式计算论坛

 找回密码
 新注册用户
搜索
查看: 7649|回复: 3

关于D2OL的屏保

[复制链接]
发表于 2006-11-9 21:32:31 | 显示全部楼层 |阅读模式
屏保下载地址:http://www.d2ol.com/installers/W ... D2OLScreenSaver.zip

下载完后解压缩

按右键,点击安装即可使用,屏保非常类似UD与WCG

 楼主| 发表于 2006-11-9 21:33:54 | 显示全部楼层
英文说明:

ScreenSaver Install Instructions

Note: The screensaver is NOT a stand alone product. It requires a full agent install first

1. Unzip the file "D2OLScreenSaver.zip" to a temporary directory.

2. Copy or move the file "D2OL Screen Saver.scr" into your Windows Directory.

Note: This directory may be called WinNT on some windows platforms.

3. Bring up the "Display Properties", click on the "Screen Saver" tab, and select the "D2OL Screen Saver" from the drop down list.

4. Click on the "Settings..." button and verify that the path displayed is the desired path to your Node Agent. If you have more than one Node installed, you must choose the one that you want the screen saver to launch (or communicate with).

5. Select the desired screen saver Mode. If you select "Full GUI", the screen saver will run the node with a graphical display of the currently docking candidate (see the section "Known Issues" for know issues on the "Full GUI" mode). If you select "Blank Screen", the screen saver will simply show a blank screen while running the node in the background.

Note: Running in the "Full GUI" mode may be processor intensive and will most likely slow down the Candidate Processing Engine. To avoid this slowdown, run in the "Blank Screen" mode.

Some Known Issues

1. Due to the fact that the D2OL Screen Saver is a hybrid (a combination of a true Windows screen saver and the Node Agent), it is not very responsive on slower machine or machines with limited available memory. This means that it might take a few seconds both to launch and to shutdown (especially when running in the "Full GUI" screen saver mode).

2. On older Windows Operating Systems (Windows 95, Windows 98, and Windows Millennium), using the "Password protected" option does not seem to work properly. If you are concerned with restricting access to your computer while it is in Screen Saver mode, and you are running on one of the above Operating Systems, we highly suggest to NOT use the D2OL Screen Saver.

Note: While Password Protection seems to work fine on Windows NT, Windows 2000, and Windows XP, we suggest testing this if you are concerned with restricting access to your computer while it is in Screen Saver mode. However, it should work fine.

3. When running with the "Password protected" option on, AND if the Node is already running when the D2OL Screen Saver launches, AND if the desired screen saver mode is "Full GUI", the Node's GUI window may not be displayed on some version of Windows. This is due to the fact that some versions of Windows seem to prevent already running processes from displaying themselves when in "Password protected" mode. However, even though the GUI window cannot be seen, it is still running and potentially slowing down the Candidate Processing Engine (as noted above, the "Full GUI" Screen Saver mode can slow down the Candidate Processing Engine). Thus, if this is the case for you, you can either 1) Run using the "Blank Screen" Screen Saver Mode, 2) Turn the "Password protected" option off, 3) Only run the Node with the Screen Saver (i.e. do not have it running all the time), or 4) Choose not to use the D2OL Screen Saver at all.

4. In some rare cases, it is possible to shut the D2OL Screen Saver down before in can successfully communicate with the running Node Agent. In this case, the Node can be left running when it should shut down. If this happens, you can shut the Node Agent down manually from the System Tray icon. It is also possible, in these cases, for the full screen GUI window to stay up and not go away on its own (if running in "Full GUI" Mode). If this happens, simply mouse click on the black background of the window and the main GUI will be restored to its normal state. You can then shut the Node down manually from the System Tray icon or leave it running if you choose.

Note: This seems to mostly happen when running on newer versions of Windows (Windows NT, Windows 2000, and Windows XP) with the "Password protected" option on and when stopping the screen saver by directly pressing <CTRL>-<ALT>-<DEL>. If, however, you press another key or use the mouse to turn off the screen saver before pressing <CTRL>-<ALT>-<DEL> (and allowing time for the Screen Saver to shutdown fully before pressing <CTRL>-<ALT>-<DEL> or entering your password), then this problem may not occur.

5. If the Node Agent is not running when the D2OL Screen Saver launches, the Screen Saver will launch the Node using its default Windows Controller (with the System Tray Icon). Other controllers (Pure Java, CLI, or File Based) are not currently supported.

6. If you are using large fonts, or a font scaling other than the default of small fonts (defined in the Display Properties), and you run in "Full GUI" Screen Saver mode, the full-screen GUI window might be sized slightly incorrectly. The result is that the right and bottom edges of the window might not cover the entire screen.

The D2OL Screen Saver is meant to be an example implementation. It is possible for interested users to write their own screen savers if they choose. For Development Details please refer to the readme file which comes with D2OLScreenSaver.zip downloadable package.
发表于 2007-1-3 23:01:52 | 显示全部楼层
安装说明:(翻译得不太好,请原谅。。。欢迎指正!!!)

屏保安装说明:

注:这个屏保不是一个单独的产品,它需要D2OL程序才能运行。

1. 解压缩 "D2OLScreenSaver.zip" 到一个暂用目录中。

2. 复制或移动 "D2OL Screen Saver.scr" 到您的 Windows 目录中。

注:这个目录名称也可能在某些 Windows 平台中叫做Winnt。(译者注:打开“开始"->"运行"后输入 %WINDIR% 即可,它会打开您系统中的 Windows/Winnt 目录。)

3. 打开 显示属性 ,然后在屏幕保护程序这个页签中,在里面的下拉选框中选择 "D2OL Screen Saver"。

4. 点击 设置... 这个按钮后,在出现的对话框中确认里面的路径是指向您的 Node 的D2OL代理。如果你有超过1个Node被安装,你必须选择让屏保和哪一个 Node 进行沟通。

5. 选择您喜欢的屏保模式。如果您选择 "Full GUI" ,该屏保将会执行 Node 当前正在评测的侯选药物的图片。(查看 “已知问题” 一项以得知有关 "Full GUI" 模式的已知问题)。如果您选择了 "Blank Screen",即该屏保将会简单的显示空白的界面。(不过 D2OL 程序依然在后台运行着)

注:使用 "Full GUI" 模式将可能导致处理器繁忙,更可能拖慢侯选药物处理引擎。使用 "Blank Screen" 屏保模式以避免这个速度下降的问题。


一些已知问题

1. 由于 D2OL屏保 是一个混合了 Windows屏保 和 D2OL代理,在一些慢的机器或记忆体有限的机器上,系统无法及时响应。 这意味着这将需要几秒钟来打开或关闭屏保和代理。(特别是在 "Full GUI" 模式中)

2. 在一些旧版本的 Windows 操作系统中 (Windows 95, Windows 98 及 Windows Millenium Edition (ME) ),使用 “密码保护” 将不见得能够正常工作。 如果您很关心您的电脑在屏幕保护模式中的使用限制,同时您也运行上述操作系统,我们强烈建议您不要使用 D2OL 屏保。

注:Windows NT, Windows 2000, Windows XP 中密码保护似乎能够很好的工作,不过如果您很关心您的电脑在屏保模式中的使用限制,我们还是建议您进行测试。虽然,它工作得很好。

3. 当密码保护被打开时,并且 D2OL 程序在屏保运行之前已经打开,同时屏保模式为 “Full GUI" ,这时候 GUI 将不会在某些版本中的 Windows 中显示。这是由于一些版本的 Windows 似乎在密码保护被打开时,禁止其他本来已经运行的进程继续运行。虽然 GUI 视窗无法被看到,但是它仍然可能拖慢侯选药物处理引擎 (如之前所注明的,"Full GUI" 模式将拖慢侯选药物处理引擎)。一旦出现这种状况,你可以选择:
        a) 使用 "Blank Screen" 模式运行屏保。
        b) 关闭密码保护
        c) 只有在屏保运行时打开程序。(即不让它总是运行着的)
        d) 不使用D2OL屏保。


4. 在一些罕见的状况中,D2OL屏保可以在它和程序成功进行沟通之前关闭它。这种情况下,程序将继续运行(它应该被关闭的)。如果发生这种状况,你可以在系统托盘处手动关闭程序。在这些情况中也可能会发生GUI全屏没有自行关闭(如果在 "Full GUI" 模式下运行)。如果这状况发生了,只要简单的用滑鼠在视窗中的黑色背景点一下,GUI主程序将会被还原到正常的状态。这时候你可以手动关闭在系统托盘里的程序或让它继续运行。

注:这似乎多数发生在那些运行较新版本的 Windows ( Windows NT, Windows 2000 以及 Windows XP ) ,同时打开了密码保护,并且使用 <CTRL> <ALT> <DEL> 直接关闭屏保。如果这个问题出现了,请在使用 <CTRL><ALT><DEL> 键之前,按任何一个键或使用滑鼠关闭屏保 (同时在按 <CTRL><ALT><DEL>键之前给屏保一些时间来完全关闭,或者输入密码),之后这个问题便应该不会发生。


建议到上一楼中自行查看英文说明,因为很长,英文也不太好,翻译起来总觉得怪怪的,很抱歉

5. 如果程序没有在D2OL屏保运行之前被打开,屏保将自行使用Windows Controller运行程序 (有系统托盘图标)。其他的Controllers (Pure Java, CLI 或者 File Based)目前还不被支援。

6. 如果您使用大字型,或者其他和正常小字体不一样的字体比例 (在 显示属性 中设置),并且您使用的是 "Full GUI" 屏保模式,全屏幕的 GUI 视窗的大小将会有些不正确。而视窗的右边和底部边缘将可能无法完全覆盖。

D2OL屏保是一个例子。之后将可能让有兴趣的用户自行编写他们自己的屏保。对于开发详情,请参考 D2OLScreenSaver.zip 里面的 readme 档案。

(译者注:我将Node翻译成了D2OL程序,感觉上这个比较好理解,而且Node真正应该翻译成什么我也不太清楚)

似乎使用 "Full GUI" 很多问题啊。。。

[ Last edited by 静思夜 on 2007-1-3 at 23:24 ]

评分

参与人数 1维基拼图 +40 收起 理由
霊烏路 空 + 40

查看全部评分

发表于 2007-1-3 23:37:37 | 显示全部楼层

屏保截图

因为背景都是黑的,我切掉了一些。
感觉还好,不过有点失望,因为以为可以全屏都是Docking的画面。
D2OL_ScreenSaver.JPG
您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

小黑屋|手机版|Archiver|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2021-8-1 11:15

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表