找回密码
 新注册用户
搜索
楼主: 花泥

[讨论] 为什么一夜才算半小时?

[复制链接]
发表于 2013-7-11 18:10:11 | 显示全部楼层
首先,Einstein的一条奇怪的错误值得注意一下:
  1. 2013/7/11 4:11:23 | Einstein@Home | No disk space (YOU must free -0.0 MB before BOINC gets space). Review preferences for maximum disk space used.
复制代码
不清楚你这几个项目有没特别吃硬盘的(WCG的某些子项目好像就比较吃)。

然后就是:
  1. 2013/7/11 4:11:48 |  | suspend work if non-BOINC CPU load exceeds 35 %
复制代码
这项。你应该设置了BOINC在其他程序的CPU占用超过35%时暂停计算。


不过看下面的记录,你应该后来已经尝试修改配置了,现在有恢复正常么?看起来早6:00之后应该没有中断过计算(但也没有出现切换项目的信息……)。
看记录,Poem和Einstein都拿不到显卡任务。看了Einstein的通信记录,应该是因为你这个显卡(核显么?)显存太小了。可以考虑换个项目。
回复

使用道具 举报

发表于 2013-7-11 19:54:14 | 显示全部楼层
你硬盘很小吗

多少G看你的计算能力和任务的储存量

我基本都是10G-100G的分配上限
回复

使用道具 举报

发表于 2013-7-11 20:44:41 | 显示全部楼层
本帖最后由 H-Dan 于 2013-7-11 20:49 编辑

楼主不考虑加一个机械盘么?
顺便楼主可以先试试一直运行..
还有可以换几个占用硬盘小的项目(其实就是不要算那些非常大的)
CEP2好像是占用硬盘大并且中间没有存盘点 可能是暂停了 所以就重新开始了
回复

使用道具 举报

发表于 2013-7-11 21:39:55 | 显示全部楼层
WCG里面的子项目 清洁能源2
拒绝大包  不要选那个项目..(其实有的是项目内某程序比较大 可以不选这个程序)
回复

使用道具 举报

发表于 2013-7-11 22:19:32 | 显示全部楼层
网络里面不要设置任务缓存吧 那样就是只有两个包了就不会切换了
回复

使用道具 举报

发表于 2013-7-12 10:32:38 | 显示全部楼层
恩 你试试看
回复

使用道具 举报

 楼主| 发表于 2013-7-12 13:13:15 | 显示全部楼层
奇怪还是慢啊,可能是因为我cpu富余性能太差了

2013/7/11 18:28:24 | World Community Grid | General prefs: using your defaults
2013/7/11 18:28:24 |  | Reading preferences override file
2013/7/11 18:28:24 |  | Preferences:
2013/7/11 18:28:24 |  | max memory usage when active: 2041.93MB
2013/7/11 18:28:24 |  | max memory usage when idle: 6125.80MB
2013/7/11 18:28:24 |  | max disk usage: 3.00GB
2013/7/11 18:28:24 |  | max CPUs used: 2
2013/7/11 18:28:24 |  | suspend work if non-BOINC CPU load exceeds 60 %
2013/7/11 18:28:24 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2013/7/11 18:37:11 | World Community Grid | General prefs: from World Community Grid (last modified 01-Jan-1970 08:00:01)
2013/7/11 18:37:11 | World Community Grid | Host location: none
2013/7/11 18:37:11 | World Community Grid | General prefs: using your defaults
2013/7/11 18:37:11 |  | Reading preferences override file
2013/7/11 18:37:11 |  | Preferences:
2013/7/11 18:37:11 |  | max memory usage when active: 2041.93MB
2013/7/11 18:37:11 |  | max memory usage when idle: 6125.80MB
2013/7/11 18:37:11 |  | max disk usage: 3.00GB
2013/7/11 18:37:11 |  | max CPUs used: 2
2013/7/11 18:37:11 |  | suspend work if non-BOINC CPU load exceeds 60 %
2013/7/11 18:37:11 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2013/7/11 19:09:16 | Einstein@Home | Resuming task LATeah0032U_1296.0_14520_0.0_0 using hsgamma_FGRP2 version 109 in slot 4
2013/7/11 20:39:16 | World Community Grid | General prefs: from World Community Grid (last modified 01-Jan-1970 08:00:01)
2013/7/11 20:39:16 | World Community Grid | Host location: none
2013/7/11 20:39:16 | World Community Grid | General prefs: using your defaults
2013/7/11 20:39:16 |  | Reading preferences override file
2013/7/11 20:39:16 |  | Preferences:
2013/7/11 20:39:16 |  | max memory usage when active: 2041.93MB
2013/7/11 20:39:16 |  | max memory usage when idle: 6125.80MB
2013/7/11 20:39:16 |  | max disk usage: 5.00GB
2013/7/11 20:39:16 |  | max CPUs used: 2
2013/7/11 20:39:16 |  | suspend work if non-BOINC CPU load exceeds 60 %
2013/7/11 20:39:16 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2013/7/11 21:07:23 |  | Contacting account manager at http://bam.boincstats.com/
2013/7/11 21:07:28 |  | Account manager: BAM! User: 148634, soffett
2013/7/11 21:07:28 |  | Account manager: BAM! Host: 459566
2013/7/11 21:07:28 |  | Account manager: Number of BAM! connections for this host: 12
2013/7/11 21:07:28 |  | Account manager contact succeeded
2013/7/11 22:06:12 | RNA World | Sending scheduler request: Requested by project.
2013/7/11 22:06:12 | RNA World | Not requesting tasks: project is not highest priority
2013/7/11 22:06:17 | RNA World | Scheduler request completed
2013/7/11 22:13:02 | World Community Grid | General prefs: from World Community Grid (last modified 01-Jan-1970 08:00:01)
2013/7/11 22:13:02 | World Community Grid | Host location: none
2013/7/11 22:13:02 | World Community Grid | General prefs: using your defaults
2013/7/11 22:13:02 |  | Reading preferences override file
2013/7/11 22:13:02 |  | Preferences:
2013/7/11 22:13:02 |  | max memory usage when active: 2041.93MB
2013/7/11 22:13:02 |  | max memory usage when idle: 6125.80MB
2013/7/11 22:13:02 |  | max disk usage: 5.00GB
2013/7/11 22:13:02 |  | max CPUs used: 2
2013/7/11 22:13:02 |  | suspend work if non-BOINC CPU load exceeds 60 %
2013/7/11 22:13:02 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2013/7/11 22:15:13 | World Community Grid | General prefs: from World Community Grid (last modified 01-Jan-1970 08:00:01)
2013/7/11 22:15:13 | World Community Grid | Host location: none
2013/7/11 22:15:13 | World Community Grid | General prefs: using your defaults
2013/7/11 22:15:13 |  | Reading preferences override file
2013/7/11 22:15:13 |  | Preferences:
2013/7/11 22:15:13 |  | max memory usage when active: 2041.93MB
2013/7/11 22:15:13 |  | max memory usage when idle: 6125.80MB
2013/7/11 22:15:13 |  | max disk usage: 5.00GB
2013/7/11 22:15:13 |  | max CPUs used: 2
2013/7/11 22:15:13 |  | suspend work if non-BOINC CPU load exceeds 60 %
2013/7/11 22:15:13 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2013/7/11 22:15:46 | World Community Grid | General prefs: from World Community Grid (last modified 01-Jan-1970 08:00:01)
2013/7/11 22:15:46 | World Community Grid | Host location: none
2013/7/11 22:15:46 | World Community Grid | General prefs: using your defaults
2013/7/11 22:15:46 |  | Reading preferences override file
2013/7/11 22:15:46 |  | Preferences:
2013/7/11 22:15:46 |  | max memory usage when active: 2041.93MB
2013/7/11 22:15:46 |  | max memory usage when idle: 6125.80MB
2013/7/11 22:15:46 |  | max disk usage: 5.00GB
2013/7/11 22:15:46 |  | max CPUs used: 2
2013/7/11 22:15:46 |  | suspend work if non-BOINC CPU load exceeds 60 %
2013/7/11 22:15:46 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2013/7/11 22:15:51 | World Community Grid | General prefs: from World Community Grid (last modified 01-Jan-1970 08:00:01)
2013/7/11 22:15:51 | World Community Grid | Host location: none
2013/7/11 22:15:51 | World Community Grid | General prefs: using your defaults
2013/7/11 22:15:51 |  | Reading preferences override file
2013/7/11 22:15:51 |  | Preferences:
2013/7/11 22:15:51 |  | max memory usage when active: 2041.93MB
2013/7/11 22:15:51 |  | max memory usage when idle: 6125.80MB
2013/7/11 22:15:51 |  | max disk usage: 5.00GB
2013/7/11 22:15:51 |  | max CPUs used: 2
2013/7/11 22:15:51 |  | suspend work if non-BOINC CPU load exceeds 60 %
2013/7/11 22:15:51 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2013/7/11 23:04:30 | World Community Grid | General prefs: from World Community Grid (last modified 01-Jan-1970 08:00:01)
2013/7/11 23:04:30 | World Community Grid | Host location: none
2013/7/11 23:04:30 | World Community Grid | General prefs: using your defaults
2013/7/11 23:04:30 |  | Reading preferences override file
2013/7/11 23:04:30 |  | Preferences:
2013/7/11 23:04:30 |  | max memory usage when active: 2041.93MB
2013/7/11 23:04:30 |  | max memory usage when idle: 6125.80MB
2013/7/11 23:04:30 |  | max disk usage: 5.00GB
2013/7/11 23:04:30 |  | max CPUs used: 2
2013/7/11 23:04:30 |  | suspend work if non-BOINC CPU load exceeds 60 %
2013/7/11 23:04:30 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2013/7/11 23:19:37 | LHC@home 1.0 | Sending scheduler request: Requested by project.
2013/7/11 23:19:37 | LHC@home 1.0 | Not requesting tasks: project is not highest priority
2013/7/11 23:19:41 | LHC@home 1.0 | Scheduler request completed
2013/7/12 3:06:22 | RNA World | Sending scheduler request: Requested by project.
2013/7/12 3:06:22 | RNA World | Not requesting tasks: project is not highest priority
2013/7/12 3:06:27 | RNA World | Scheduler request completed
2013/7/12 4:19:43 | LHC@home 1.0 | Sending scheduler request: Requested by project.
2013/7/12 4:19:43 | LHC@home 1.0 | Not requesting tasks: project is not highest priority
2013/7/12 4:19:48 | LHC@home 1.0 | Scheduler request completed
2013/7/12 8:06:32 | RNA World | Sending scheduler request: Requested by project.
2013/7/12 8:06:32 | RNA World | Not requesting tasks: project is not highest priority
2013/7/12 8:06:37 | RNA World | Scheduler request completed
2013/7/12 9:19:53 | LHC@home 1.0 | Sending scheduler request: Requested by project.
2013/7/12 9:19:53 | LHC@home 1.0 | Not requesting tasks: project is not highest priority
2013/7/12 9:20:09 | LHC@home 1.0 | Scheduler request completed
2013/7/12 12:18:14 | World Community Grid | Resuming task E214240_078_C.35.C31H18N2S2.00315925.4.set1d06_0 using cep2 version 640 in slot 1
2013/7/12 13:06:38 | RNA World | Sending scheduler request: Requested by project.
2013/7/12 13:06:38 | RNA World | Not requesting tasks: project is not highest priority
2013/7/12 13:06:48 | RNA World | Scheduler request completed
回复

使用道具 举报

发表于 2013-7-12 13:57:03 | 显示全部楼层
你笔记本就不要算CEP2了,那是自虐,去WCG网站登录后把CEP2项目取消掉不接受任务。
你为什么要设置CPU大于60%停止工作呢?
建议把BAM关闭
回复

使用道具 举报

 楼主| 发表于 2013-7-12 17:40:04 | 显示全部楼层
我要退出目前账号重新注册账号怎么弄呢

进网站看到参数一头雾水
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~
欢迎大家多多支持基金会~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2024-5-16 14:19

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表