|
楼主 |
发表于 2013-12-11 13:35:24
|
显示全部楼层
本帖最后由 金鹏 于 2013-12-11 13:54 编辑
嗯看来包大小不同,仔细看了LOG,原来是FahSpy出的乌龙
跑的是8104,FahSpy确识别成8103,造成PPD错乱难道是langouste3-15.17造成的影响,下个包再看看是否出现这个情况
下面是以前跑8104的PPD
[17:05:02] Loaded queue successfully.
[17:05:02] Sent data
[17:05:02] Connecting to http://128.143.231.201:8080/
[17:05:10] Posted data.
[17:05:10] Initial: 0000; - Receiving payload (expected size: 30242134)
[17:10:33] - Downloaded at ~91 kB/s
[17:10:33] - Averaged speed for that direction ~537298 kB/s
[17:10:33] + Received work.
[17:10:33] Trying to send all finished work units
[17:10:33] Project: 8103 (Run 0, Clone 6, Gen 262)
[17:10:33] + Attempting to send results [December 10 17:10:33 UTC]
[17:10:33] - Reading file work/wuresults_03.dat from core
[17:10:33] (Read 91748795 bytes from disk)
[17:10:33] Connecting to http://128.143.231.201:8080/
[17:10:33] - Couldn't send HTTP request to server
[17:10:33] + Could not connect to Work Server (results)
[17:10:33] (128.143.231.201:8080)
[17:10:33] + Retrying using alternative port
[17:10:33] Connecting to http://128.143.231.201:80/
[17:10:33] - Couldn't send HTTP request to server
[17:10:33] + Could not connect to Work Server (results)
[17:10:33] (128.143.231.201:80)
[17:10:33] - Error: Could not transmit unit 03 (completed December 10) to work server.
[17:10:33] - 3 failed uploads of this unit.
[17:10:33] + Attempting to send results [December 10 17:10:33 UTC]
[17:10:33] - Reading file work/wuresults_03.dat from core
[17:10:33] (Read 91748795 bytes from disk)
[17:10:33] Connecting to http://128.143.199.97:8080/
[17:10:33] - Couldn't send HTTP request to server
[17:10:33] + Could not connect to Work Server (results)
[17:10:33] (128.143.199.97:8080)
[17:10:33] + Retrying using alternative port
[17:10:33] Connecting to http://128.143.199.97:80/
[17:10:33] - Couldn't send HTTP request to server
[17:10:33] + Could not connect to Work Server (results)
[17:10:33] (128.143.199.97:80)
[17:10:33] Could not transmit unit 03 to Collection server; keeping in queue.
[17:10:33] + Sent 0 of 1 completed units to the server
[17:10:33] + Closed connections
[17:10:33]
[17:10:33] + Processing work unit
[17:10:33] Core required: FahCore_a5.exe
[17:10:33] Core found.
[17:10:33] Working on queue slot 04 [December 10 17:10:33 UTC]
[17:10:33] + Working ...
[17:10:33] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 04 -np 32 -checkpoint 15 -verbose -lifeline 514 -version 634'
[17:10:33]
[17:10:33] *------------------------------*
[17:10:33] Folding@Home Gromacs SMP Core
[17:10:33] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[17:10:33]
[17:10:33] Preparing to commence simulation
[17:10:33] - Looking at optimizations...
[17:10:33] - Created dyn
[17:10:33] - Files status OK
[17:10:36] - Expanded 30241622 -> 33024540 (decompressed 109.2 percent)
[17:10:36] Called DecompressByteArray: compressed_data_size=30241622 data_size=33024540, decompressed_data_size=33024540 diff=0
[17:10:36] - Digital signature verified
[17:10:36]
[17:10:36] Project: 8104 (Run 0, Clone 33, Gen 143)
[17:10:36]
[17:10:36] Assembly optimizations on if available.
[17:10:36] Entering M.D.
[17:10:42] Mapping NT from 32 to 32
[17:10:45] Completed 0 out of 250000 steps (0%)
[17:20:50] Completed 2500 out of 250000 steps (1%)
[17:30:33] Completed 5000 out of 250000 steps (2%)
[17:40:14] Completed 7500 out of 250000 steps (3%)
[17:49:56] Completed 10000 out of 250000 steps (4%)
[17:59:39] Completed 12500 out of 250000 steps (5%)
[18:09:19] Completed 15000 out of 250000 steps (6%)
[18:19:02] Completed 17500 out of 250000 steps (7%)
[18:28:44] Completed 20000 out of 250000 steps (8%)
|
|