找回密码
 新注册用户
搜索
查看: 5255|回复: 6

[求助] GPU客户端求助

[复制链接]
发表于 2008-9-5 11:40:05 | 显示全部楼层 |阅读模式
我的显卡是8600GT每次运算1个或者2个包后 就会出现以下LOG
[02:21:24] Folding@Home GPU Core - Beta
[02:21:24] Version 1.09 (Fri Aug 1 11:46:54 PDT 2008)
[02:21:24]
[02:21:24] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[02:21:24] Build host: amoeba
[02:21:24] Board Type: Nvidia
[02:21:24] Core      :
[02:21:24] Preparing to commence simulation
[02:21:24] - Looking at optimizations...
[02:21:24] - Created dyn
[02:21:24] - Files status OK
[02:21:25] - Expanded 45482 -> 246249 (decompressed 541.4 percent)
[02:21:25] Called DecompressByteArray: compressed_data_size=45482 data_size=246249, decompressed_data_size=246249 diff=0
[02:21:25] - Digital signature verified
[02:21:25]
[02:21:25] Project: 5506 (Run 3, Clone 715, Gen 34)
[02:21:25]
[02:21:25] Assembly optimizations on if available.
[02:21:25] Entering M.D.
[02:21:31] mdrun_gpu returned -1
[02:21:31] Going to send back what have done.
[02:21:32] logfile size: 0 info=0 bed=0 hdr=25
[02:21:32] - Writing 558 bytes of core data to disk...
[02:21:32] Done: 46 -> 85 (compressed to 184.7 percent)
[02:21:32]   ... Done.
[02:21:32]
[02:21:32] Folding@home Core Shutdown: UNSTABLE_MACHINE
[02:21:35] CoreStatus = 7A (122)
[02:21:35] Sending work to server
[02:21:35] Project: 5506 (Run 3, Clone 715, Gen 34)
[02:21:35] - Read packet limit of 540015616... Set to 524286976.


[02:21:35] + Attempting to send results [September 5 02:21:35 UTC]
[02:21:36] + Results successfully sent
[02:21:36] Thank you for your contribution to Folding@Home.
[02:21:40] EUE limit exceeded. Pausing 24 hours.

然后就停住了 重新关闭客户端再重新打开又可以重新运算
请问我的这个问题在哪里啊?
回复

使用道具 举报

发表于 2008-9-5 12:23:27 | 显示全部楼层
是计算发生错误了。
显卡超频了? 请在机器稳定的情况下进行计算
回复

使用道具 举报

发表于 2008-9-5 13:26:31 | 显示全部楼层
显存最好不要超频。我没有证据,但我认为显存是最容易降低成本的。所以显存的超频潜力最低。甚至对于FAH这种全速运行的程序,显存是否能长时间的承受这样的负荷都是个问题。
回复

使用道具 举报

发表于 2008-9-5 13:31:06 | 显示全部楼层
要么5506的包是有问题,要么就是驱动兼容问题。
楼主建议你使用177.92驱动,我换了后5506的EUE减少了很多(偶尔还是有)
回复

使用道具 举报

 楼主| 发表于 2008-9-5 17:19:09 | 显示全部楼层
原帖由 welch 于 2008-9-5 12:23 发表
是计算发生错误了。
显卡超频了? 请在机器稳定的情况下进行计算


我没超频啊 难道是华硕自带的smartdoctor闹得?
回复

使用道具 举报

 楼主| 发表于 2008-9-5 17:19:42 | 显示全部楼层
原帖由 privater 于 2008-9-5 13:31 发表
要么5506的包是有问题,要么就是驱动兼容问题。
楼主建议你使用177.92驱动,我换了后5506的EUE减少了很多(偶尔还是有)


我用的177.83
92的驱动哪里下的?可以给个地址么?谢~~
回复

使用道具 举报

 楼主| 发表于 2008-9-5 17:21:01 | 显示全部楼层
原帖由 welch 于 2008-9-5 12:23 发表
是计算发生错误了。
显卡超频了? 请在机器稳定的情况下进行计算


机器肯定稳定啊 我都是空载的时候开的folding~
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2024-5-8 07:37

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表