找回密码
 新注册用户
搜索
楼主: Bismarck

请教一个问题的原因(貌似已解决)

[复制链接]
发表于 2009-2-19 23:15:53 | 显示全部楼层
“百度以上”!

511的包虽然温度高,但353的包电流声大,所以谁用显卡更狠不好说。
回复

使用道具 举报

发表于 2009-2-19 23:24:54 | 显示全部楼层

回复 #16 nouse 的帖子

晕倒,兄弟计算能力惊人啊,具有3213二地主的实力了,
明天就会突破16K大关了

N卡里就属计算511大毒包温度最高,A卡里是计算548甜包温度最高,我那毒药电流达到56A,
要是一个卡算511毒包,一个算548甜包,机箱后面出热风能当电吹风
三个卡式抽风扇+2个8CM机箱风扇,+两个显卡风扇,+CPU风扇,风噪叠加那声音很壮观

[ 本帖最后由 金鹏 于 2009-2-19 23:39 编辑 ]
回复

使用道具 举报

 楼主| 发表于 2009-2-19 23:37:01 | 显示全部楼层
虽然百度以上,可并不怎么出问题,反倒是低温包出问题

最近正琢磨着要么更换散热(只能换工包便宜货,否则不如换卡),要么换公版的8800GTS 512M

就是资金没批下来啊……

AC的NV6能压住8800GT么?
回复

使用道具 举报

 楼主| 发表于 2009-2-20 01:50:50 | 显示全部楼层
一次比较正常的交接日志:5766---->5753


[17:21:01] Completed 95%
[17:23:30] Completed 96%
[17:26:00] Completed 97%
[17:28:29] Completed 98%
[17:30:56] Completed 99%
[17:33:24] Completed 100%
[17:33:26] Successful run
[17:33:26] DynamicWrapper: Finished Work Unit: sleep=10000
[17:33:35] Reserved 113480 bytes for xtc file; Cosm status=0
[17:33:35] Allocated 113480 bytes for xtc file
[17:33:35] - Reading up to 113480 from "work/wudata_03.xtc": Read 113480
[17:33:35] Read 113480 bytes from xtc file; available packet space=786316984
[17:33:35] xtc file hash check passed.
[17:33:35] Reserved 33528 33528 786316984 bytes for arc file=<work/wudata_03.trr> Cosm status=0
[17:33:35] Allocated 33528 bytes for arc file
[17:33:35] - Reading up to 33528 from "work/wudata_03.trr": Read 33528
[17:33:35] Read 33528 bytes from arc file; available packet space=786283456
[17:33:35] trr file hash check passed.
[17:33:35] Allocated 560 bytes for edr file
[17:33:35] Read bedfile
[17:33:35] edr file hash check passed.
[17:33:35] Allocated 0 bytes for logfile
[17:33:35] Could not open/read logfile=<work/wudata_03.log>; Cosm status=-1
[17:33:35] GuardedRun: success in DynamicWrapper
[17:33:35] GuardedRun: done
[17:33:35] Run: GuardedRun completed.
[17:33:39] - Writing 148080 bytes of core data to disk...
[17:33:39] Done: 147568 -> 147294 (compressed to 99.8 percent)
[17:33:39]   ... Done.
[17:33:39] - Shutting down core
[17:33:39]
[17:33:39] Folding@home Core Shutdown: FINISHED_UNIT
[17:33:43] CoreStatus = 64 (100)
[17:33:43] Sending work to server
[17:33:43] Project: 5755 (Run 10, Clone 127, Gen 95)
[17:33:43] - Read packet limit of 540015616... Set to 524286976.


[17:33:43] + Attempting to send results [February 19 17:33:43 UTC]
[17:33:47] + Results successfully sent
[17:33:47] Thank you for your contribution to Folding@Home.
[17:33:47] + Number of Units Completed: 105

[17:33:51] - Preparing to get new work unit...
[17:33:51] + Attempting to get work packet
[17:33:51] - Connecting to assignment server
[17:33:52] - Successful: assigned to (171.67.108.11).
[17:33:52] + News From Folding@Home: GPU folding beta
[17:33:53] Loaded queue successfully.
[17:33:55] + Closed connections
[17:33:55]
[17:33:55] + Processing work unit
[17:33:55] Core required: FahCore_11.exe
[17:33:55] Core found.
[17:33:55] Working on queue slot 04 [February 19 17:33:55 UTC]
[17:33:55] + Working ...
[17:33:55]
[17:33:55] *------------------------------*
[17:33:55] Folding@Home GPU Core - Beta
[17:33:55] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[17:33:55]
[17:33:55] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[17:33:55] Build host: amoeba
[17:33:55] Board Type: Nvidia
[17:33:55] Core      :
[17:33:55] Preparing to commence simulation
[17:33:55] - Looking at optimizations...
[17:33:56] - Created dyn
[17:33:56] - Files status OK
[17:33:56] - Expanded 96596 -> 489240 (decompressed 506.4 percent)
[17:33:56] Called DecompressByteArray: compressed_data_size=96596 data_size=489240, decompressed_data_size=489240 diff=0
[17:33:56] - Digital signature verified
[17:33:56]
[17:33:56] Project: 5753 (Run 2, Clone 39, Gen 94)
[17:33:56]
[17:33:56] Assembly optimizations on if available.
[17:33:56] Entering M.D.
[17:34:03] Working on Protein
[17:34:13] Client config found, loading data.
[17:34:13] Starting GUI Server
[17:36:46] Completed 1%
[17:39:16] Completed 2%
[17:41:51] Completed 3%
[17:44:23] Completed 4%
[17:46:50] Completed 5%




中间那个5755是怎么回事?

[ 本帖最后由 Bismarck 于 2009-2-20 01:52 编辑 ]
回复

使用道具 举报

发表于 2009-2-22 06:02:12 | 显示全部楼层
Folding@home Core Shutdown: UNSTABLE_MACHINE
FAH基于什么判断的呢!?
回复

使用道具 举报

发表于 2009-2-22 08:09:32 | 显示全部楼层
原帖由 alpha707070 于 2009-2-22 06:02 发表
Folding@home Core Shutdown: UNSTABLE_MACHINE
FAH基于什么判断的呢!?


它可能事先自带了一个正确的结果,比如 1+1 的结果是 2,这个是开发人员的电脑上算好的。

然后让你的显卡做同样的计算,就是算 1+1,如果等于 2 就说明稳定,不等于 2 就说明不稳定。
回复

使用道具 举报

 楼主| 发表于 2009-2-22 17:46:02 | 显示全部楼层
今天把机器搬宿舍了,顺便把显卡拆开看了下,发现很恐怖……

家里的灰尘虽然少,可都是那种毛毛状的,杀手级的,把显卡风道堵住了

学校宿舍灰尘虽然多,可都是粉末状的,堵住风道的可能性不大

刚好解释了为什么机器搬回家之后,跑分就不稳定的原因

算是把问题解决了
回复

使用道具 举报

 楼主| 发表于 2009-2-22 17:46:28 | 显示全部楼层
清理灰尘后,跑分时温度下降30多度……

等某肌肉男来了,再把我的CPU风扇暴力拆开清理清理
回复

使用道具 举报

头像被屏蔽
发表于 2009-2-22 18:38:18 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
回复

使用道具 举报

发表于 2009-4-17 21:45:21 | 显示全部楼层
我也有同样情况,连续将近24小时都这样,然后就好了,不知道是不是服务器那边有什么限制。
我是GTX 295 + EK的水冷头,12w泵,温度一直都在48-49度,最重要的是,温度高一点的那一片没事,很好,低1度的这一片倒不行。
回复

使用道具 举报

发表于 2009-4-17 22:25:34 | 显示全部楼层

回复 #25 asukahan 的帖子

欢迎兄弟携295水冷强卡加入FAH,空了多来冒泡,顺便搞个签名图片吧

FAH程序有时很脆弱,一不小心就会碰到莫名其妙的问题,可能关机后开机又好了,郁闷
回复

使用道具 举报

发表于 2009-4-18 10:07:10 | 显示全部楼层
FAH程序是根据温度判断显卡的稳定性么?
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2025-5-15 09:19

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表