跑SMP和BIGADV12均木有奖励分

muclemanxb

回复 11# zxj-iq180


    好嘛，再观察几天看看～话说都观察了一个多星期了，实在耐心有限

vennyfan

回复 1# muclemanxb

先一直跑SMP2 等拿到奖励分了再转BA  能跑BA的机器跑几个SMP2算个啥？ 睡一觉就OK啦！！！

Lynt

回复 13# 金鹏
谢谢指点，我等下次装新机器再试试看

ONLY

现在偶尔能接到的6900/6901，跑完貌似也木有奖励分了，偶没注意，好像连基本分都木有了～～～

跑BA-8的算友需要引起注意了～～～   

对于6903/6904之类的BA-12包，低配机器无法跑完，还是安心的跑SMP2吧～～～

话说偶的Q6600自从跑了两个6901都没给分以后，现在已经改跑SMP2了～～～

淡定、安心、不折腾～～～

至于说到上传，如金版所说，如果开启了Langouste代理上传，那么就不要理会log文件中的上传失败提示～～～

只用注意Langouste Log文件最后的那句即可：

Ratelimit: sent 11301975 byte(s) in 309.186 seconds, 36553 Bps (35.69 kBps)

如上例，便是说在309秒的时间内，上传了11301975字节（约11MB）的内容到服务器，上传速率约为35.69KB～～～

根据这句，便可以判断上传是否成功（SMP2结果包的大小在11MB左右，BA-8包的大小在100MB左右，BA-12包的大小在200MB左右）～～～

若成功上传，但在6小时内未见到预估的得分，那么便是设置方面的问题了（用户名、队伍编号、passkey等等）～～～

再有，便是斯坦福服务器的问题（例如上面提到的BA-8不得分的情况）～～～

附上一个结果包的完整上传log，供参考：

Tue Jun 5 03:25:39 2012 Accepted connection from: 127.0.0.1:51513
Tue Jun 5 03:25:39 2012 PID for socket: 1050
Tue Jun 5 03:25:39 2012 PID 1050: issending: 0
Tue Jun 5 03:25:39 2012 ===> PID 1050 is contacting main assignment server
Tue Jun 5 03:25:39 2012 (0) resolving 'assign.stanford.edu:8080'
Tue Jun 5 03:25:40 2012 (0) Connecting to: 171.67.108.200:8080
Tue Jun 5 03:25:40 2012 Accepted connection from: 127.0.0.1:51512
Tue Jun 5 03:25:40 2012 PID for socket: 1050
Tue Jun 5 03:25:40 2012 PID 1050: issending: 0
Tue Jun 5 03:25:40 2012 ===> PID 1050 is (most likely) contacting WU server, content length: 11287410
Tue Jun 5 03:25:40 2012 ===> Helper pid: -1
Tue Jun 5 03:25:40 2012 ===> PID 1050: numcores: 0
Tue Jun 5 03:25:40 2012 ===> now: 1338866740, last helper launched at: 0
Tue Jun 5 03:25:40 2012 ===> Launching helper: '/proc/1050/cwd/langouste-helper.sh' (exe name: '/usr/local/fah/fah6')...
Tue Jun 5 03:25:40 2012 ===> Forked 1081
Tue Jun 5 03:25:40 2012 (1) Local: received 16384 bytes, sent 0 bytes
Tue Jun 5 03:25:40 2012 Accepted connection from: 127.0.0.1:51516
Tue Jun 5 03:25:40 2012 PID for socket: 1050
Tue Jun 5 03:25:40 2012 PID 1050: issending: 0
Tue Jun 5 03:25:40 2012 ===> PID 1050 is (most likely) contacting WU server, content length: 11287410   <--  Langouste此时已经代理上传，结果包的大小为11287410字节
Tue Jun 5 03:25:40 2012 ===> Helper pid: -1
Tue Jun 5 03:25:40 2012 ===> PID 1050: numcores: 0
Tue Jun 5 03:25:40 2012 ===> now: 1338866740, last helper launched at: 1338866740
Tue Jun 5 03:25:40 2012 ===> WARNING: can only launch one helper in 2 minutes (per client)   <--  此时客户端以为上传失败，还在尝试上传，所以会在log文件中看到连续上传失败的记录
Tue Jun 5 03:25:40 2012 (1) Local: received 16384 bytes, sent 0 bytes
Tue Jun 5 03:25:40 2012 Accepted connection from: 127.0.0.1:51517
Tue Jun 5 03:25:40 2012 PID for socket: 1050
Tue Jun 5 03:25:40 2012 PID 1050: issending: 0
Tue Jun 5 03:25:40 2012 ===> PID 1050 is (most likely) contacting WU server, content length: 11287410
Tue Jun 5 03:25:40 2012 ===> Helper pid: -1
Tue Jun 5 03:25:40 2012 ===> PID 1050: numcores: 0
Tue Jun 5 03:25:40 2012 ===> now: 1338866740, last helper launched at: 1338866740
Tue Jun 5 03:25:40 2012 ===> WARNING: can only launch one helper in 2 minutes (per client)   <--  客户端仍然在尝试上传，所以log文件中会出现多次的上传失败记录
Tue Jun 5 03:25:40 2012 (1) Local: received 16384 bytes, sent 0 bytes
Tue Jun 5 03:25:40 2012 Accepted connection from: 127.0.0.1:51518
Tue Jun 5 03:25:40 2012 PID for socket: 1050
Tue Jun 5 03:25:40 2012 PID 1050: issending: 0
Tue Jun 5 03:25:40 2012 ===> PID 1050 is (most likely) contacting WU server, content length: 11287410
Tue Jun 5 03:25:40 2012 ===> Helper pid: -1
Tue Jun 5 03:25:40 2012 ===> PID 1050: numcores: 0
Tue Jun 5 03:25:40 2012 ===> now: 1338866740, last helper launched at: 1338866740
Tue Jun 5 03:25:40 2012 ===> WARNING: can only launch one helper in 2 minutes (per client)   <--  上传失败，同上
Tue Jun 5 03:25:40 2012 (1) Local: received 16384 bytes, sent 0 bytes
Tue Jun 5 03:25:40 2012 (0) Connected.
Tue Jun 5 03:25:40 2012 (0) Local connection closed (bsize: 0).
Tue Jun 5 03:25:40 2012 (0) Local: received 559 bytes, sent 396 bytes
Tue Jun 5 03:25:40 2012 (0) Remote: received 396 bytes, sent 559 bytes
Tue Jun 5 03:25:40 2012 Accepted connection from: 127.0.0.1:51519
Tue Jun 5 03:25:40 2012 PID for socket: 1050
Tue Jun 5 03:25:40 2012 PID 1050: issending: 0
Tue Jun 5 03:25:40 2012 ===> PID 1050 is (most likely) contacting WU server, content length: 512
Tue Jun 5 03:25:40 2012 (0) resolving '128.143.231.202:8080'
Tue Jun 5 03:25:40 2012 (0) Connecting to: 128.143.231.202:8080
Tue Jun 5 03:25:41 2012 (0) Connected.
Tue Jun 5 03:26:06 2012 (0) Remote connection closed (rbsize: 0).
Tue Jun 5 03:26:06 2012 (0) Local: received 631 bytes, sent 3812141 bytes
Tue Jun 5 03:26:06 2012 (0) Remote: received 3812141 bytes, sent 631 bytes     <--   从服务器下载新包的提示
Tue Jun 5 03:26:06 2012 Accepted connection from: 127.0.0.1:51521
Tue Jun 5 03:26:06 2012 PID for socket: 1050
Tue Jun 5 03:26:06 2012 PID 1050: issending: 0
Tue Jun 5 03:26:06 2012 ===> PID 1050 is contacting some other (sic!) server
Tue Jun 5 03:26:06 2012 (0) resolving 'www.stanford.edu'
Tue Jun 5 03:26:06 2012 (0) Connecting to: 171.67.215.200:80
Tue Jun 5 03:26:07 2012 (0) Connected.
Tue Jun 5 03:26:42 2012 Accepted connection from: 127.0.0.1:51523
Tue Jun 5 03:26:42 2012 PID for socket: 1095
Tue Jun 5 03:26:42 2012 PID 1095: issending: 1
Tue Jun 5 03:26:42 2012 (1) resolving '128.143.231.202:8080'
Tue Jun 5 03:26:42 2012 (1) Connecting to: 128.143.231.202:8080
Tue Jun 5 03:26:42 2012 (1) Connected.
Tue Jun 5 03:26:57 2012 (0) Local connection closed (bsize: 0).
Tue Jun 5 03:26:57 2012 (0) Local: received 119 bytes, sent 2683557 bytes
Tue Jun 5 03:26:57 2012 (0) Remote: received 2683557 bytes, sent 119 bytes
Tue Jun 5 03:31:57 2012 (1) Remote connection closed (rbsize: 0).
Tue Jun 5 03:31:57 2012 (1) Local: received 11287534 bytes, sent 615 bytes
Tue Jun 5 03:31:57 2012 (1) Remote: received 615 bytes, sent 11287534 bytes
Tue Jun 5 03:31:57 2012 (1) Ratelimit: sent 11287534 byte(s) in 314.681 seconds, 35869 Bps (35.02 kBps)  <--  成功上传的提示

还有一点必须注意的是，除了在截至期限前跑完，还必须上传完毕！

而且，斯坦福的服务器会限定上传时间为2小时，也就是说，一旦开始上传，必须在2小时上传完毕（高带宽用户可以不用刻意注意）～～～

只是需要定期查看下Langouste Log文件，看看上传情况即可～～～

wpf999

回复 15# muclemanxb

上传了3次都失败

    [20:41:16] - 3 failed uploads of this unit.


[20:41:16] + Attempting to send results [June 5 20:41:16 UTC]
[20:41:16] - Reading file work/wuresults_02.dat from core
[20:41:16] (Read 12782522 bytes from disk)
[20:41:16] Connecting to http://128.143.231.202:8080/
[20:41:16] - Couldn't send HTTP request to server
[20:41:16] + Could not connect to Work Server (results)
[20:41:16] (128.143.231.202:8080)
[20:41:16] + Retrying using alternative port
[20:41:16] Connecting to http://128.143.231.202:80/
[20:41:16] - Couldn't send HTTP request to server
[20:41:16] + Could not connect to Work Server (results)
[20:41:16] (128.143.231.202:80)
[20:41:16] Could not transmit unit 02 to Collection server; keeping in queue.
[20:41:16] + Sent 0 of 1 completed units to the server
[20:41:16] + Closed connections
复制代码

ONLY

回复  muclemanxb

上传了3次都失败

    [20:41:16] - 3 failed uploads of this unit.


[20:41:16] +  ...
wpf999 发表于 2012-6-6 20:42

看下Langouste Log文件，里面最后一句是否已经提示上传完毕～～～

Tue Jun 5 03:31:57 2012 (1) Ratelimit: sent 11287534 byte(s) in 314.681 seconds, 35869 Bps (35.02 kBps)

如果开启了Langouster，那么Log文件中类似下面的上传错误提示便无须理会～～～

只用关注Langouste Log文件便可～～～

[03:32:11] - 4 failed uploads of this unit.


[03:32:11] + Attempting to send results [June 6 03:32:11 UTC]
[03:32:11] - Reading file work/wuresults_03.dat from core
[03:32:11] (Read 11301339 bytes from disk)
[03:32:11] Connecting to http://128.143.199.97:8080/
[03:32:11] - Couldn't send HTTP request to server
[03:32:11] + Could not connect to Work Server (results)
[03:32:11] (128.143.199.97:8080)
[03:32:11] + Retrying using alternative port
[03:32:11] Connecting to http://128.143.199.97:80/]
[03:32:11] - Couldn't send HTTP request to server
[03:32:11] + Could not connect to Work Server (results)

muclemanxb

灰常感谢以上诸位道友的解答，贫道这厢有礼了

muclemanxb

不好意思，刚才在看《凡人修仙传》，所以一时间没转过来，各位道友有礼了～各位队友有礼了

Eugene.C

我想问一下，Q9500用V7客户端，接到8041,8042，用控制台版本那个6.34的SMP2客户端，只接到7200包。 这个是SMP2包吗？ 还是只是SMP包，我有点搞不清楚。

金鹏

回复 24# Eugene.C

个人理解：可以用FAHCORE版本来区分，一般来讲调用A3内核计算的算是正宗SMP2，调用A5内核的是BA，

而V7客户端下的调用A4内核计算的包，是兼容单核和多核CPU计算的混合体--算是SMP和SMP2的混血是一种妥协的产物，所以众多地主都说V7效率低就是由此而来吧

muclemanxb

1. 调用A3内核计算的算是正宗SMP2

复制代码

掐指一算贫道已经正宗SMP2两个星期了，目前布太蛋锭中

Eugene.C

回复 25# 金鹏

原来是这样，谢谢金版回复。我用论坛下的绿色版6.34 SMP2客户端，只收到7200包，好像是什么GROMACS内核，根目录里看计算程序也是A4，看来也不是SMP2啊，FAH官网上也查不到信息难道Q9500就不能跑SMP2？ 我确认用户名和PASSKEY无误，设置也是按照论坛教程来的，不知道要如何才行了。

金鹏

回复 27# Eugene.C

兄弟是使用FAHSPY监控的吧？这个包比较特殊，不能真实反应兄弟机器的算能，平常心对待吧

参考 http://www.equn.com/forum/viewth ... &highlight=7200

wpf999

回复 27# Eugene.C


    7200包是smp2

Eugene.C

回复 28# 金鹏

监控确实是用FAHSPY的，无法正确识别我也知道，这个倒不管它。

我刚才用BA的快捷方式启动了程序，收到了A3核心的包，是6098。。。跑了20分钟还没见进度涨1，呵呵。