找回密码
 新注册用户
搜索
查看: 11363|回复: 55

[讨论] ========= Core21 v0.0.14 has been released! ===========

[复制链接]
发表于 2015-12-3 23:49:52 | 显示全部楼层 |阅读模式
本帖最后由 金鹏 于 2015-12-19 13:25 编辑

暂时不建议兄弟们尝试,我先来做做小白鼠,降低了性能提升稳定性?

FahCore_21 Version 0.0.14.rar (2.34 MB, 下载次数: 27)

新的0.014版21内核稳定性提高,PPD降低约10+%
core21是64位内核,效率很高,是2016年的主力内核,
现有17/18内核包的后续项目,可能会直接采用21内核(或者增强版的22内核)计算,而不是沿用17/18内核,
总之丢弃幻想,迎接core21(或者增强版的22内核)全面普及
  1. 980TI在1470MHZ下跑9630包,用0.012内核跑TPF=1:06,用0.014内核跑TPF=1:14, PPD从72万降到60万,降低约15%(性能损失远大于8.5%)
  2. 980TI在1370MHZ下跑9643包,用0.012内核跑TPF=1:09,用0.014内核跑TPF=1:19, PPD从67万降到55万,降低约18%(性能损失远大于8.5%)
复制代码
Core21 v0.0.14 has been released!
by JohnChodera » Tue Dec 08, 2015 3:41 am
We rolled out Core21 v0.0.14 last week.

Main features are:
* Bad State errors fixed: Improvements that drastically reduce the high rate of Bad State errors we were seeing with earlier versions of the core, especially with NVIDIA cards.
These Bad State errors were ironically caused by a couple of bugs in the code that checks the simulation for integrity every time a checkpoint file is written. The simulation integrity was solid, but there was a high false positive rate for errors. This should be greatly reduced with 0.0.14.
For NVIDIA cards, this unfortunately comes with a 10% performance regression when PME is in use, but we are compensating by rebenchmarking affected core 21 projects. We hope to release an update that will undo this performance regression soon.
* More debugging info: When Bad State errors *do* occur, we now bring back more information to help us diagnose these issues.
* Early NaN detection eliminates slowdowns: We previously had some reports of WU slowdowns that were traced to NaNs appearing in the simulation and slowing down the integration loop drastically. Previously, these were not detected until a checkpoint was written. Now, checks are performed much more frequently, hopefully eliminating these slowdowns.
* Minor improvements: We have also made a number of other minor improvements that give us a bit more flexibility and control over what simulations can be run.

Thanks to everyone who helped make this possible, especially Peter Eastman (OpenMM developer extraordinaire!) and all of the testers who helped kick the tires, including (but by no means limited to):
New Core 21 build 0.0.13 live in BETA!

15 posts • Page 1 of 1



New Core 21 build 0.0.13 live in BETA!
[size=1em]by JohnChodera » Wed Dec 02, 2015 7:44 am
We have a new Core 21 build (0.0.13) live in BETA as of today.

Many thanks to donors on Slack (many of which are on Folding Forum too) who helped us test the core before making it live, especially (but not limited to!):
CODE: SELECT ALLchristianvirtual
davidcoton
bollix47
grandpa
bruce
jimerickson
frodothehobbit


This core should fix the vast majority of Bad State errors we have been seeing with Core 21, and when errors do occur in the future, more information to help us debug the cause will be brought back to our servers.

The current hotfix comes at the cost of ~8.5% performance degradation on NVIDIA cards for systems that use PME. We'll be working hard to push out an updated core that fixes the performance regression in the coming weeks.

Please bear with us as we rebenchmark projects that will be impacted by this performance change.

Please report any issues you see with core build 0.0.13 here!



评分

参与人数 3基本分 +39 收起 理由
TeamAMDFX + 5 赞一个!
kppom + 4 辛苦了!
CCCP0081 + 30

查看全部评分

回复

使用道具 举报

发表于 2015-12-4 08:34:55 | 显示全部楼层
说是用到PME的系统才会掉性能,也许关掉BIOS的电源管理选项可以解决?LINUX不知道受影响吗,抽空试一下
回复

使用道具 举报

发表于 2015-12-4 10:31:01 | 显示全部楼层
我个人抵制core21~
回复

使用道具 举报

发表于 2015-12-4 13:43:30 | 显示全部楼层
不是小白鼠,是领头狼
回复

使用道具 举报

发表于 2015-12-4 14:39:26 | 显示全部楼层
已经更新了,跑了个9208, 65万PPD@1300Mhz,温度62℃,感觉还可以。
回复

使用道具 举报

发表于 2015-12-4 18:05:27 | 显示全部楼层
CCCP0081 发表于 2015-12-4 13:43
不是小白鼠,是领头狼

出差结束已到家,预计保持50W~120W输出,直到来年开春。


评分

参与人数 1基本分 +200 收起 理由
wpf999 + 200 很给力!

查看全部评分

回复

使用道具 举报

 楼主| 发表于 2015-12-4 18:41:41 | 显示全部楼层
CCCP0081 发表于 2015-12-4 18:05
出差结束已到家,预计保持50W~120W输出,直到来年开春。

舰队司令下令,全舰火力大开
回复

使用道具 举报

发表于 2015-12-5 08:44:43 | 显示全部楼层
FAH Client還是假死狀態,但是從http://folding.stanford.edu/client/網頁上監視到還在正常跑,AB裡面也顯示正常。 看來這鍋還是要Stanford背啊。
回复

使用道具 举报

发表于 2015-12-5 08:50:37 | 显示全部楼层
本帖最后由 yimu35 于 2015-12-5 13:43 编辑
yimu35 发表于 2015-12-4 14:39
已经更新了,跑了个9208, 65万PPD@1300Mhz,温度62℃,感觉还可以。
以下都是1300Mhz
9206 要接近68度,然後PPD才60萬。 這個跑完重啟下機器先。
9634 71度,TPF 1:15   PPD才58萬5左右。  不知道這個新內核下,是否能拉高一點Core?
回复

使用道具 举报

 楼主| 发表于 2015-12-6 09:07:12 | 显示全部楼层
yimu35 发表于 2015-12-5 08:50
以下都是1300Mhz
9206 要接近68度,然後PPD才60萬。 這個跑完重啟下機器先。
9634 71度,TPF 1:15   PPD才 ...

发现0.014内核损失的TPF在8-12秒之间,不论包大小,有些1分上下TPF的包损失PPD厉害,
而有些4分+TPF的损失十秒TPF尚可接受

不全面,不知兄弟那是否也是这样




回复

使用道具 举报

发表于 2015-12-6 12:24:36 | 显示全部楼层
感谢金版甘为小白鼠的精神,赞一个。
回复

使用道具 举报

发表于 2015-12-6 22:33:30 | 显示全部楼层
9208 ppd才50万多一点,功耗比18高不少。。老21就是各种爆,对21彻底放弃了!
回复

使用道具 举报

发表于 2015-12-7 10:16:45 | 显示全部楼层
Linux下跑了一会基本都是9704包,PPD没感觉明显变化,970@1481MHz PPD 33万+,今天改成 Adv参数,下午看看跑其他包有什么变化,气温降下来,不知0.0.14能不能稳在1481MHz
回复

使用道具 举报

发表于 2015-12-7 12:10:58 | 显示全部楼层
早上抓了一下log,发现周末还跑了一个9712包和11411包,9712在1481MHz下正常跑完,PPD接近33万,11411是新包吗?用实际时间和得分算得 TPF为2:48,PPD 42万+(算上上传下载时间实际41万+)
回复

使用道具 举报

 楼主| 发表于 2015-12-7 13:54:25 | 显示全部楼层
玩家共和国 发表于 2015-12-6 22:33
9208 ppd才50万多一点,功耗比18高不少。。老21就是各种爆,对21彻底放弃了!

超频后,980TI比980/970更容易爆包,对980和970降频后基本上爆包低于5%了
但是980TI就要达到10%,貌似不完全是超频原因,说是GM二代和老黄驱动有屎洞有关,要老黄那边修正
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2024-5-7 03:19

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表