请问什么地方出错了。

lonelyghost_li

14:12:17:WU00:FS01:0x22:Project: 11761 (Run 0, Clone 841, Gen 12)
14:12:17:WU00:FS01:0x22:Unit: 0x0000001380fccb0a5e77d7f95c9
14:12:17:WU00:FS01:0x22:Reading tar file core.xml
14:12:17:WU00:FS01:0x22:Reading tar file integrator.xml
14:12:17:WU00:FS01:0x22:Reading tar file state.xml
14:12:18:WU00:FS01:0x22:Reading tar file system.xml
14:12:18:WU00:FS01:0x22:Digital signatures verified
14:12:18:WU00:FS01:0x22:Folding@home GPU Core22 Folding@home Core
14:12:18:WU00:FS01:0x22:Version 0.0.2
14:12:29:WU00:FS01:0x22:ERROR:exception: Error initializing context: clGetDeviceInfo (-5)
14:12:29:WU00:FS01:0x22:Saving result file ..\logfile_01.txt
14:12:29:WU00:FS01:0x22:Saving result file science.log
14:12:29:WU00:FS01:0x22:Folding@home Core Shutdown: BAD_WORK_UNIT
14:12:30:WARNING:WU00:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:12:30:WU00:FS01:Sending unit results: id:00 state:SEND error:FAULTY project:11761 run:0 clone:841 gen:12 core:0x22 unit:0x0000001380fccb0a5e77d7f95c9
14:12:30:WU00:FS01:Uploading 8.50KiB to 128.252.203.10
14:12:30:WU00:FS01:Connecting to 128.252.203.10:8080
14:12:30:WU02:FS01:Connecting to 65.254.110.245:8080
14:12:31:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
14:12:31:WU02:FS01:Connecting to 18.218.241.186:80
14:12:51:WARNING:WU00:FS01:WorkServer connection failed on port 8080 trying 80
14:12:51:WU00:FS01:Connecting to 128.252.203.10:80
14:13:12:WARNING:WU00:FS01:Exception: Failed to send results to work server: Failed to connect to 128.252.203.10:80: 由于连接方在一段时间后没有正确答复或连接的主机没有反应，连接尝试失败。
14:13:12:WU00:FS01:Trying to send results to collection server
14:13:12:WU00:FS01:Uploading 8.50KiB to 155.247.166.219
14:13:12:WU00:FS01:Connecting to 155.247.166.219:8080
14:13:41:WU01:FS00:0xa7:Completed 7500 out of 250000 steps (3%)
14:14:04:WU00:FS01:Upload complete
14:14:04:WU00:FS01:Server responded WORK_ACK (400)
14:14:04:WU00:FS01:Cleaning up

thomasbbq

放log放完整，不知道你的硬件和软件配置是很难确定问题的。

对于你高亮出来这个问题

1. Error initializing context: clGetDeviceInfo (-5)

复制代码

有可能是驱动修改/精简造成的。使用DDU清除驱动后安装GeForce官网提供的版本。

lonelyghost_li

thomasbbq 发表于 2020-3-21 23:32
放log放完整，不知道你的硬件和软件配置是很难确定问题的。

对于你高亮出来这个问题

受教了，log作为附件上传，麻烦您帮忙看看，为什么GPU计算总是出错。

Keyco

lonelyghost_li 发表于 2020-3-23 08:35
受教了，log作为附件上传，麻烦您帮忙看看，为什么GPU计算总是出错。

去官网下完整驱动，然后使用“清洁安装”试试看。